Metal Mix SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a cool gray floor from CPF Floors’ Quick48+ collection that reads like brushed metal without the cold underfoot feel. The wide 7″×48″ planks carry a tone-on-tone gray palette that pairs naturally with the coastal-modern interiors common across Southwest Florida.
Metal Mix is built for the rooms that take the most punishment: open-concept living areas, busy kitchens, laundry rooms, and the high-traffic hallways that connect them. The 100% waterproof rigid core means spills and tracked-in humidity won’t swell or buckle the planks, which matters in a climate where indoor moisture levels rarely drop.
It’s a practical fit for slab-on-grade construction — no flex, no bounce — and the gray palette hides the fine sand and dust that come with Florida living better than lighter or warmer tones. Snowbird owners and rental landlords will appreciate that the 20 mil wear layer holds up between turnovers without showing wear quickly.
| Product Type | Rigid Core Vinyl |
|---|---|
| Size | 7″x48″ |
| Thickness | 5.5mm |
| Wear Layer | 20 Mil |
| Traffic Class | 23 – 33 Heavy Residential / General Commercial |
| Attached Pad | 1.5mm HD EVA PAD |
| Installation Method | Angle – Angle |
Flooring Queen installs Metal Mix at $3.99 per square foot, and that price covers everything that makes the project complete: delivery to your Fort Myers or Southwest Florida address, removal of the old flooring, standard surface preparation, the installation itself, baseboard reinstallation, transition strips at doorways, and removal of the old material from your property.
A few situations carry an additional charge: significant subfloor leveling beyond a standard skim coat, stair nosing, or decorative inlays and custom border work. Contact us for a free in-home measurement and a written quote that reflects your exact room conditions — no guesswork on the final number.
Waterproof laminate and SPC rigid-core planks look similar on a product card and are priced close to each other, but they’re built differently in ways that matter in a Florida home. Metal Mix has a solid stone-plastic composite core — it doesn’t expand or contract with humidity swings the way a wood-fiber laminate core does, even a waterproof-coated one. That stability is a real advantage over concrete slabs that absorb ground moisture.
Where laminate can have an edge is in underfoot feel — a thicker HDF core can feel slightly warmer and more wood-like. Metal Mix addresses this with its attached 1.5mm HD EVA pad, closing much of that comfort gap. For wet rooms and high-humidity exposure, the SPC core is the more reliable long-term choice.
| Metal Mix | Waterproof Laminate | |
|---|---|---|
| Water resistance | 100% waterproof rigid core | Surface-resistant; core can swell |
| Scratch resistance / wear layer | 20 mil commercial-grade wear layer | AC3–AC4 aluminum oxide coating |
| Comfort underfoot | Attached 1.5mm HD EVA pad included | Thicker HDF core; softer feel |
| Installed price | $3.99 / sq ft installed | $4.50 / sq ft installed |
| Best room | Kitchens, baths, slab-on-grade | Bedrooms, above-grade living areas |
Sweep or vacuum Metal Mix regularly — use a hard-floor setting and lift the beater bar to avoid scuffing the wear layer. Damp-mop with a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted Murphy’s Oil Soap alternative formulated for vinyl; avoid acidic or abrasive cleaners that can dull the finish over time. Never use a steam mop on SPC floors — the concentrated heat can soften the adhesive bond between layers and compromise the plank structure. Wipe standing spills promptly even though the core is waterproof, because pooled water at the seams can eventually work into the subfloor. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Metal Mix has a 100% waterproof SPC rigid core, meaning the plank itself will not swell or warp from water exposure. That said, prolonged pooling at seams can migrate to the subfloor beneath. Clean up standing water promptly and the floor itself will hold up without issue.
The 20 mil wear layer on Metal Mix is rated for Heavy Residential and General Commercial traffic, making it one of the more scratch-resistant surfaces available at this price point. Daily pet traffic, claws included, falls well within what this wear layer is rated to handle. Cleanup of accidents is straightforward on a waterproof surface.
Metal Mix is SPC — stone-plastic composite — which means its core is denser and more dimensionally stable than standard LVP built on a flexible vinyl base. SPC resists denting under heavy furniture, doesn’t flex over minor subfloor imperfections, and handles temperature swings better, making it a stronger fit for Florida’s climate and concrete slab foundations.
Metal Mix installs on any grade — below, on, or above slab — so most rooms in a typical Southwest Florida home are fair game. It’s well-suited to kitchens, bathrooms, living areas, and bedrooms. Stairs require separate nosing pieces and additional cost; outdoor or unconditioned spaces are outside the product’s intended use.
Metal Mix includes a 1.5mm HD EVA pad pre-attached to each plank, so separate underlayment is not required. That built-in pad adds a modest layer of sound absorption and a slightly softer feel underfoot — useful over concrete slabs that would otherwise feel completely rigid beneath your feet.
Metal Mix uses an angle-angle click system that can float over many existing hard surfaces, including tile and vinyl, provided the surface is flat, secure, and within acceptable height tolerances. Loose, cracked, or uneven tile typically needs to come up. A free in-home measurement will confirm whether your current floor qualifies or requires removal.
We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
