Prime Pinnacle In Rocca Oak SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a honey-toned oak look built for homes that need real durability. TRUCOR’s Prime Pinnacle collection pairs a wide 12-by-90-inch plank format with a warm, natural grain that reads as genuine hardwood without the vulnerability. It’s a grounded, livable floor that works in almost every room.
Southwest Florida puts flooring through a particular set of stresses: concrete slabs that shift with humidity, salt air that accelerates corrosion, and the moisture that follows every summer storm through the door. Prime Pinnacle in Rocca Oak is built for exactly that environment. Its rigid core resists the expansion and contraction that buckles lesser floors, and it installs at, on, or below grade — meaning concrete slabs are no obstacle.
The 20 mil wear layer and TRUWEAR finish hold up under heavy foot traffic, sandy shoes, and the kind of year-round use that comes with rental properties or households that simply live hard on their floors. The IXPE attached pad softens the slab underfoot and helps with ambient sound.
| Construction | WPC |
|---|---|
| Size | 12″ x 90″ |
| Thickness | 12 mm |
| Wear Layer | 20 mil |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge 2G |
| Edges | Painted Bevel |
| Finish | TRUWEAR™ |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime Pinnacle in Rocca Oak at $3.99 per square foot, and that price covers the full job: delivery to your Fort Myers or Southwest Florida home, removal of the existing floor covering, standard subfloor preparation, floating installation using the Valinge 2G click system, base molding, and transition strips at doorways. Old flooring disposal is included — no separate hauling fee.
Work that goes beyond the standard scope carries an upcharge: significant subfloor leveling, stair nosing installations, custom inlay patterns, or flush stair nose pieces. Call us or book online and we’ll send a measurer to your home at no charge. You’ll walk away with a written room-by-room price before any commitment.
Shoppers who want the warmth of an oak floor often weigh Prime Pinnacle against engineered hardwood, and it’s a fair comparison — both products mimic real wood convincingly. Where Prime Pinnacle wins is moisture tolerance. Engineered hardwood has a real-wood veneer that can swell, cup, or stain when water sits on it; Prime Pinnacle’s core is waterproof through and through, which matters in a Florida home where spills, humidity, and slab moisture are constants.
Engineered hardwood wins on one front: it can be lightly sanded and refinished once or twice over its life, which extends its run in the home. Prime Pinnacle cannot be refinished — when the wear layer is gone, replacement is the only option. For most households, the 20 mil wear layer outlasts the time they’d realistically spend in the home before a style refresh anyway.
| Prime Pinnacle in Rocca Oak | Engineered Hardwood | |
|---|---|---|
| Water resistance | Waterproof core, any grade level | Water-resistant surface only; can cup or swell |
| Scratch resistance / wear layer | 20 mil TRUWEAR finish | Urethane topcoat; thinner on budget options |
| Comfort underfoot | IXPE attached pad, 12 mm thick | Real wood feel; firmer without added pad |
| Installed price | $3.99 / sq ft installed | ~$8.99 / sq ft installed |
| Best room | Kitchens, baths, below-grade spaces | Dry living areas, bedrooms |
Sweep or vacuum regularly to keep abrasive grit from working against the wear layer — avoid vacuums with a spinning beater bar, which can scuff the surface over time. Damp-mop with a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a product labeled safe for luxury vinyl; stay away from oil soaps, wax-based products, and anything acidic. Never use a steam mop on this floor — sustained heat and pressurized moisture can compromise the locking joints and the attached IXPE pad beneath the planks. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Prime Pinnacle in Rocca Oak has a fully waterproof core, so standing water won’t cause the plank itself to swell or buckle. That said, water that sits at seams for extended periods can eventually work beneath the floor and affect the subfloor below. Clean up pooling water promptly as a general practice.
The 20 mil wear layer makes this one of the more scratch-resistant options in the vinyl plank category, and it handles pet claws better than most engineered or laminate floors. Accidents clean up without staining because the core is waterproof. Very large, active dogs on an abrasive surface can still leave marks over time, but daily wear holds well.
Prime Pinnacle is built on a stone-plastic composite core, which is denser and more dimensionally stable than the flexible core used in traditional luxury vinyl plank. That rigidity means less telegraphing of subfloor imperfections and better resistance to denting under furniture legs. Standard LVP is softer and easier to cut, but SPC is the stronger performer for high-traffic or slab-on-grade installations.
An IXPE pad is factory-attached to every plank, so no separate underlayment purchase is necessary. IXPE is a closed-cell foam that adds cushion underfoot and reduces the hollow sound common with rigid-core floors over concrete. Do not add a second pad layer beneath it — stacking underlayment can interfere with the Valinge 2G locking system.
A single room typically wraps in one day; a whole home of 1,200 to 1,800 square feet usually runs two to three days depending on layout complexity and the number of transitions. The floating Valinge 2G click system is fast to assemble, but door undercutting, stair nosing, and irregular room shapes add time. Our measurer will map out a realistic schedule at your free in-home visit.
In many cases, yes — Prime Pinnacle can float directly over existing hard-surface floors like tile or vinyl as long as the surface is flat, firmly adhered, and within acceptable height tolerances for your door clearances. Loose tiles, high grout lines, or significant lippage will need to be addressed first. Our measurer will assess the existing surface and flag anything that requires prep before install.
When you buy LVP from Flooring Queen, our crew handles delivery, tear-out, prep, install, and trim — no subs, no surprises. One showroom in Fort Myers, one team accountable from quote to final baseboard. Call (239) 763-0770 for a free measure.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
