Prime In Katahdin Oak SPC Rigid-Core Plank starts at $3.99/sq ft installed in Fort Myers — a natural oak-toned floor from TRUCOR’s Prime collection that brings warm, woodgrain character to any room without the vulnerability of real wood.
Southwest Florida is hard on floors. High humidity, concrete slabs, and the constant cycle of doors opening to salt air demand a core that simply won’t swell or buckle. The rigid SPC construction here handles all three grade levels — above, on, or below grade — which means it works whether you’re in a raised ranch in Cape Coral or a slab-on-grade home in Estero.
The 20 mil wear layer is thick enough for households with pets, active kids, or the heavy foot traffic that comes with snowbird hosting and short-term rentals. The IXPE pad is already attached, cushioning the feel underfoot and deadening sound on those hard Florida slabs.
| Construction | WPC |
|---|---|
| Size | 9″ x 60″ |
| Thickness | 7.5 mm |
| Wear Layer | 20 mil / 0.5 mm |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge |
| Edges | Micro Bevel |
| Finish | TRUWEAR™ |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
At $3.99/sq ft installed, the price covers material and labor together — no line-item surprises. That includes delivery to your home, removal of your existing floor covering, standard subfloor preparation, full installation with the Valinge locking system, baseboard reinstallation, and transition moldings at doorways. Debris gets cleared from the site when the crew leaves.
Some situations do carry upcharges: significant floor leveling where the slab is out of plane by more than industry tolerance, stair nosing installations, or decorative border work. Flooring Queen offers a free in-home measurement and a written quote so you know exactly what your project costs before any work begins.
Engineered hardwood gives you real wood on the surface — a genuine veneer that can be lightly sanded and refinished, and carries the warmth of natural grain. If authenticity and the ability to refinish matter to you, it has an edge. But in Southwest Florida’s climate, that wood veneer is sensitive. Humidity swings, flooding from tropical storms, and the moisture that wicks up through concrete slabs are real risks that can cause engineered hardwood to cup, warp, or delaminate over time.
Prime in Katahdin Oak is fully waterproof through the core, installs on or below grade, and costs meaningfully less. It won’t refinish, but the 20 mil wear layer resists the scratches and scuffs that would demand refinishing in the first place. For most Florida households, the durability math favors SPC.
| Prime in Katahdin Oak | Engineered Hardwood | |
|---|---|---|
| Water resistance | Waterproof through the core | Surface-resistant only; can warp or cup |
| Scratch resistance / wear layer | 20 mil commercial-grade wear layer | Thin veneer; susceptible to deep scratches |
| Comfort underfoot | IXPE pad attached; cushioned on slab | Firmer; pad added separately or not at all |
| Installed price | $3.99/sq ft installed | Approx. $8.99/sq ft installed |
| Best room | Any level, including bathrooms and basements | Above-grade, low-humidity rooms only |
Keep Prime in Katahdin Oak clean with a dry microfiber mop for daily dust and sand — both common in Southwest Florida homes. For wet cleaning, use a pH-neutral vinyl floor cleaner such as Bona Stone, Tile & Laminate or a diluted dish-soap solution; wring the mop nearly dry before contact with the floor. Avoid steam mops entirely — the heat and pressurized moisture can compromise the locking joints and IXPE pad over time. Never use abrasive scrubbers, wax-based products, or solvent cleaners, as they can dull or damage the TRUWEAR finish. A walk-off mat at exterior doors cuts down on sand and grit, which are the primary culprits in surface wear on any resilient floor. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Prime in Katahdin Oak is fully waterproof — the SPC rigid core does not absorb moisture, so standing water won’t cause the plank itself to swell or buckle. That said, water that sits long enough to seep beneath the floor through gaps at the perimeter can affect the subfloor below, so prompt cleanup and proper sealing at walls still matter.
The 20 mil wear layer on this plank is among the thicker options in residential SPC, rated for commercial use as well, which means pet nails and the occasional sliding stop are well within its tolerance. Accidents clean up easily since the surface and core are both waterproof — no staining or swelling from urine if you clean it up within a reasonable time.
This plank ships with an IXPE pad pre-attached, so no separate underlayment purchase is needed. IXPE is a closed-cell foam that adds a noticeable cushion underfoot compared to bare rigid-core planks, and it also provides a layer of sound absorption — useful on concrete slabs where hard impacts tend to transmit noise through the floor.
Flooring Queen installs throughout the Fort Myers metro and surrounding communities, including Naples and Bonita Springs to the south and Cape Coral and Lehigh Acres to the north and east. If you’re unsure whether your address is in the service area, a quick call or the free measure request will confirm it — coverage is broad across Lee and Collier counties.
A single large room or two average-sized rooms typically wraps in one day with the Valinge floating install system, which clicks together quickly without adhesive cure time. A full home — say 1,500 to 2,000 sq ft — generally runs two to three days depending on layout complexity, the number of transitions, and how much floor prep the slab requires.
Many Southwest Florida condo HOAs require an IIC (Impact Isolation Class) rating of 50 or higher, and the IXPE attached pad on this plank contributes to meeting that threshold — but the exact assembly rating depends on what’s beneath the floor and the specific building construction. Flooring Queen can review your HOA’s written requirements before the project starts and confirm whether an additional underlayment layer is needed for compliance.
Flooring Queen has installed luxury vinyl and SPC plank for homes across Lee, Collier, and Charlotte counties. Single-location accountability — our installers, our supply chain, our quote. Free in-home measure: (239) 763-0770.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
