Prime XXL in Villa Oak

Other colors in this collection:

Tile in Linear OatmealTile in Travertine GoldTile in Rust MetallicTile in Travertine BlancoTile in Marmo KhakiTile in Marmo WhiteMetal GrayNatural Deco

Specifications

Prime Xxl In Villa Oak SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a natural oak-look floor built wide and long for open, modern spaces. TRUCOR’s Prime XXL collection stretches each plank to 10 by 84 inches, so Villa Oak’s warm, natural wood grain reads with fewer seams and more visual flow. It’s a practical choice that looks thoughtful.

What Prime Xxl In Villa Oak SPC Rigid-Core Plank is built for

Southwest Florida homes put flooring through real stress: slab foundations that shift with moisture, salt air that works into seams, and seasonal occupancy that swings humidity from unoccupied lows to full-house highs. Prime XXL in Villa Oak is built to hold up under those conditions. The rigid core won’t buckle when humidity climbs, and the floating installation handles minor concrete movement without adhesive failure.

The 20 mil wear layer and cork underlayment pad make it a strong fit for main living areas, kitchens, and open-plan layouts where foot traffic is constant and spills happen. It’s also a sensible pick for rental properties or snowbird homes that sit empty for months — no warping, no surprise damage waiting on arrival.

Product Specifications

Construction WPC
Size 10″x 84″
Thickness 10 mm
Wear Layer 20 mil / 0.5 mm
Attached Pad Cork
Installation Method Floating
Installation Level Above, On, Below
Click System Angle Tap
Edges Painted Bevel
Finish TRUWEAR
Warranty Limited Lifetime Residential / 15 Year Commercial

Installed pricing in Fort Myers & Southwest Florida

Flooring Queen installs Prime XXL in Villa Oak at $3.99 per square foot throughout Southwest Florida. That price covers pulling up your existing floor and removing it from the site, surface prep for typical slabs, the floating plank installation, baseboard reinstallation, and standard transition pieces between rooms.

A few things can add to that base number: significant low spots or high spots in the subfloor that require leveling compound, stair nosing installations, or any custom border or pattern work. Both are quoted in writing before any work starts. Schedule a free in-home measurement and we’ll put a firm number on paper so there’s nothing vague when the project begins.

How Prime Xxl In Villa Oak SPC Rigid-Core Plank compares

Engineered hardwood and Prime XXL in Villa Oak serve similar aesthetic goals — wide-plank wood looks in living rooms and main areas — but they behave very differently in a Florida home. Engineered hardwood is real wood on top, which gives it a warmth and refinishing potential SPC can’t match. But that wood veneer is sensitive to humidity swings and standing water, both of which are routine in Southwest Florida.

Prime XXL wins on moisture resistance, subfloor flexibility, and installed cost. Engineered hardwood wins if you want a floor you can sand and refinish in 10–15 years, or if authentic wood grain texture is a priority. For beachside condos, slab homes, or rentals, the SPC usually makes more practical sense. For a dry, climate-controlled interior where resale appearance matters most, engineered hardwood is a real competitor.

Prime XXL in Villa Oak Engineered Hardwood
Water resistance 100% waterproof core and plank Sensitive to moisture; not waterproof
Scratch resistance / wear layer 20 mil commercial-grade wear layer Varies; thin veneer can dent and scratch
Comfort underfoot Cork pad included; firm but cushioned Softer, warmer feel; no underlayment needed
Installed price $3.99/sq ft installed Approx. $8.99/sq ft installed
Best room Any grade; kitchens, living areas, rentals Above-grade dry rooms; not below-grade

Care & maintenance

Sweep or vacuum Prime XXL in Villa Oak regularly — use a hard-floor setting on your vacuum rather than a beater bar, which can scuff the wear layer over time. For mopping, a damp microfiber mop with a pH-neutral cleaner like Bona Hard-Surface Floor Cleaner is ideal; avoid anything acidic or abrasive. Keep steam mops off this floor entirely — the heat and pressure can compromise the locking joints and underlayment bond. No refinishing or resealing is ever needed; the TRUWEAR finish is factory-applied and permanent for the life of the floor. For technical guidance, see the World Floor Covering Association vinyl flooring guide.

Frequently asked questions

Will standing water actually damage this floor, or is ‘waterproof’ just marketing?

Prime XXL in Villa Oak has a 100% waterproof SPC core, meaning the plank itself won’t swell or buckle if water sits on it. That said, water that works under the floor through gaps at walls or transitions can still cause subfloor issues — keep perimeter seams protected and wipe up pooling water promptly.

We have two large dogs — how well does this hold up to claws and accidents?

The 20 mil wear layer on Prime XXL is thick enough for households with large dogs; it resists surface scratching better than most wood-look floors at this price point. Accidents clean up without staining since the core is waterproof. Trim nails regularly to reduce drag marks on any hard-surface floor.

Does installing SPC vinyl actually help when it’s time to sell, or do buyers want real wood?

In Southwest Florida, waterproof rigid-core vinyl has become broadly accepted by buyers, especially in slab-on-grade homes where engineered hardwood carries moisture risk. It won’t generate the same premium as authentic hardwood in a luxury market, but quality wide-plank SPC like this won’t hurt your sale — and it signals a practical, well-maintained home.

What does it actually cost to keep this floor looking good year after year?

Ongoing maintenance costs for Prime XXL are minimal — a bottle of pH-neutral floor cleaner every few months is essentially all you need. There’s no refinishing, no resealing, and no professional cleaning required on any regular schedule. A $15–$20 bottle of Bona Hard-Surface cleaner and a microfiber mop covers most households.

How many days should I block off for a full-home installation?

A single room typically installs in one day; a whole-home project of 1,000–1,500 square feet usually runs two to three days with a professional crew. Prime XXL’s angle-tap locking system is straightforward, which keeps labor time predictable. We’ll confirm the exact schedule in your written quote based on your actual square footage and layout.

Are there any rooms in the house where this floor isn’t a good fit?

Prime XXL in Villa Oak is rated for above-grade, on-grade, and below-grade installations, so it works in basements, ground-floor slabs, and upper levels without restriction. It’s well-suited for kitchens, living areas, bedrooms, and even enclosed lanais. Outdoor or unconditioned spaces exposed to direct sun or rain are the one place it shouldn’t go.

Why buy from Flooring Queen

We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.

Continue exploring:

Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.

Book Your Appointment