Prime Pinnacle In Etna Oak SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a warm brown oak-look floor built for Southwest Florida homes that need real durability without sacrificing style. TRUCOR’s Prime collection delivers a 12mm thick, 12-by-90-inch plank with the kind of wide-format presence that reads as genuinely wood-like underfoot. Etna Oak lands in a grounded, medium brown tone that works equally well in open living spaces and bedroom retreats.
Southwest Florida’s combination of high humidity, concrete slab construction, and salt air near the coast makes most traditional flooring a liability. Prime Pinnacle in Etna Oak is built for exactly that environment. Its rigid stone-polymer core won’t expand or contract with seasonal humidity swings, and its installation is approved above, on, and below grade — meaning concrete slabs are not a problem.
The attached IXPE pad cushions the slab’s hardness and adds a quiet, solid feel underfoot. For snowbird and seasonal properties, that dimensional stability matters even more: a floor that sits closed up through a humid Southwest Florida summer needs to come back unchanged in the fall. The 20 mil TRUWEAR™ wear layer adds scratch and scuff resistance suited to the sandy, high-traffic demands of coastal living.
| Construction | WPC |
|---|---|
| Size | 12″ x 90″ |
| Thickness | 12 mm |
| Wear Layer | 20 mil |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge 2G |
| Edges | Painted Bevel |
| Finish | TRUWEAR™ |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime Pinnacle in Etna Oak at $3.99 per square foot, and that price covers the full scope of a standard job: delivery to your home, removal of your current flooring, surface preparation for a clean substrate, installation of the planks, baseboard replacement, transition strips at doorways and room boundaries, and disposal of the old material.
Some conditions carry an additional charge — significant subfloor leveling work, stair nosing installations, or highly detailed layout patterns like herringbone fall outside the standard scope. Your project gets a free in-home measurement and a written quote before any work begins, so the number you approve is the number on the invoice. No surprises at the end of the job.
Homeowners drawn to Etna Oak’s warm brown wood look often consider engineered hardwood as the natural comparison. Engineered hardwood has genuine wood on the surface, which gives it authentic grain depth and the ability to be lightly refinished — advantages SPC can’t match. But in Southwest Florida, the moisture equation tips hard toward SPC. Engineered hardwood reacts to humidity fluctuations, requires above-grade installation only in most cases, and can’t tolerate standing water without damage.
Prime Pinnacle’s rigid core is fully waterproof, installs on concrete slabs at any grade level, and costs meaningfully less. If you want a floor that ignores a spilled bucket, a pet accident, or a summer of closed-up coastal air, the SPC makes more practical sense here. If authentic wood grain and refinishability matter most, engineered hardwood is the honest alternative.
| Prime Pinnacle in Etna Oak | Engineered Hardwood | |
|---|---|---|
| Water resistance | 100% waterproof rigid core | Moisture-sensitive; warps if wet |
| Scratch resistance / wear layer | 20 mil TRUWEAR™ commercial-grade | Varies; real wood can scratch and dent |
| Comfort underfoot | 12mm thick with IXPE pad attached | Naturally dense; no pad needed |
| Installed price | $3.99 per sq ft installed | Approx. $8.99 per sq ft installed |
| Best room | Any level, wet or dry spaces | Above-grade, low-humidity rooms only |
Sweep or vacuum Prime Pinnacle in Etna Oak regularly to clear the fine grit and sand that Southwest Florida homes collect quickly — abrasive particles underfoot do the most day-to-day wear on any floor. For damp mopping, use a pH-neutral vinyl-safe cleaner such as Bona Hard-Surface Floor Cleaner or a comparable product; avoid anything acidic, solvent-based, or ammonia-heavy, as these can dull the TRUWEAR™ finish over time. Steam mops are not compatible with SPC flooring — the concentrated heat and pressure can compromise the locking joints and the attached underlayment pad. Wipe up standing spills promptly; while the core is waterproof, prolonged pooling at seams or near baseboards is worth avoiding. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Prime Pinnacle in Etna Oak has a 100% waterproof rigid core, meaning water that reaches the plank surface won’t swell or warp it. The distinction worth knowing: the planks themselves are waterproof, but prolonged standing water at the perimeter or underneath the floor — from a slab leak, for example — is a separate structural issue no flooring can solve.
The 20 mil TRUWEAR™ wear layer on this plank is a commercial-grade rating, which handles pet nails, dragged food bowls, and the general chaos of active dogs better than most residential-grade floors. Cleanup from accidents is straightforward since the surface and core don’t absorb liquid. Very large dogs with untrimmed nails can still leave marks on any vinyl over time — no floor is claw-proof.
A single room typically takes one day; a whole-home project in the 1,000–1,500 square foot range usually runs two to three days depending on layout complexity and how much prep the subfloor requires. The Valinge 2G locking system on these planks clicks together efficiently, which keeps install moving. Your Flooring Queen crew will give you a project-specific timeline at the in-home measurement.
TRUCOR backs Prime Pinnacle with a limited lifetime warranty for residential use and a 15-year warranty for commercial installations. Coverage addresses manufacturing defects, wear-through of the surface layer under normal use, and structural integrity of the plank. It does not cover damage from improper installation, flooding events, or misuse — full terms are available in the downloadable warranty document TRUCOR provides with this product.
SPC stands for stone-polymer composite, which means the core is reinforced with limestone powder, making it denser and more rigid than standard LVP’s foam-based core. Prime Pinnacle is an SPC floor. That rigidity means it resists denting from furniture legs, performs better over minor subfloor imperfections, and stays dimensionally stable in Southwest Florida’s humidity swings more reliably than traditional LVP. The trade-off is that SPC can feel slightly harder underfoot — the attached IXPE pad here helps offset that.
Many Southwest Florida condo and HOA boards require a minimum IIC (impact insulation class) rating — commonly IIC 50 or higher — before approving any hard-surface flooring installation. Prime Pinnacle includes an attached IXPE underlayment pad, which contributes to sound dampening, but you’ll need to verify that the tested assembly meets your specific association’s threshold. Submit the product spec sheet and your association’s requirements to your board before scheduling installation — Flooring Queen can provide the documentation you need.
Twenty years of installing waterproof vinyl in Southwest Florida means we know which SPC cores hold up to slab moisture and which don’t. Licensed, insured, family-run. Written installed quote before any work starts: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
