Tile In Travertine Mist SPC Tile starts at $3.99 per square foot installed in Fort Myers — a soft light-gray stone-look floor from TRUCOR’s TILE collection. It captures the muted, mineral tones of natural travertine without the weight or upkeep of real stone. Floating on a rigid SPC core with a factory-attached IXPE pad, it works as a practical large-format tile for any room in the house.
A 16″ x 32″ format tile reads as genuinely architectural, and on Southwest Florida’s concrete slab foundations it goes down without the height-buildup concerns that come with mortar-set stone. The SPC core handles the humidity swings that come with coastal living — saltwater breezes, summer condensation, the months a snowbird home sits closed and air-conditioned. It’s rated for above, on, and below grade installs, so garages and bonus rooms under the house are fair game.
The 20 mil wear layer and TRUWEAR finish hold up well in high-traffic households, rental properties, and homes with sandy floors tracked in from Gulf-area beaches. Because the entire plank is waterproof by construction, a slow leak under a vanity or a wet dog coming in from the lanai isn’t a crisis.
| Construction | SPC |
|---|---|
| Size | 16″ x 32″ |
| Thickness | 6.0 mm |
| Wear Layer | 20 mil / 0.5 mm |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | I4F |
| Edges | Painted Bevel |
| Finish | TRUWEAR |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Tile In Travertine Mist at $3.99 per square foot, a figure that covers material, labor, removal of your old flooring, standard subfloor preparation, baseboard reinstallation, transition strips between rooms, and cleanup and debris removal when the crew leaves. There’s no assembly fee surprise at the end.
Certain situations carry an upcharge: significant floor leveling beyond routine prep, stair nosing, diagonal or custom-pattern layouts, and decorative borders. The best way to know your actual number is to schedule Flooring Queen’s free in-home measure — you’ll receive a written, itemized quote before any work begins.
The obvious comparison for a travertine-look floor is real porcelain tile in a similar format. Porcelain is harder and resists surface abrasion slightly better, but it installs over a mortar bed, requires grout joints that need sealing and periodic resealing, and adds meaningful weight — a real consideration on second-floor additions. It’s also cold and unforgiving underfoot.
TRUCOR’s SPC version clicks together as a floating floor, installs over most existing hard surfaces, and never needs grout sealed. The IXPE pad adds warmth and a quieter feel. Trade-offs: porcelain can be refinished or re-grouted in sections; an SPC tile that chips must be replaced. For budget, TRUCOR comes in at $3.99 installed versus roughly $8.99 for a porcelain tile job.
| Tile in Travertine Mist | Porcelain Tile | |
|---|---|---|
| Water resistance | 100% waterproof core | Grout joints absorb moisture unless sealed |
| Scratch resistance / wear layer | 20 mil TRUWEAR surface | Extremely hard glaze, no wear layer concept |
| Comfort underfoot | Warm; IXPE pad cushions | Hard and cold without radiant heat |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Any grade level, wet or dry | Dry areas; grout maintenance in wet zones |
Sweep or vacuum regularly — a hard-floor vacuum setting (no rotating beater bar) keeps grit from acting as sandpaper on the TRUWEAR finish. Damp-mop with a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted dish-soap solution; avoid anything acidic, oil-based, or abrasive. Never use a steam mop on SPC — sustained heat and pressure can compromise the locking joints over time. Because this product has no grout lines, there’s nothing to seal or reseal, which removes one of the bigger ongoing maintenance tasks associated with a traditional tile floor. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Correct: TRUCOR Tile In Travertine Mist uses a click-lock I4F system with painted bevel edges, so there are no open grout joints to seal, stain, or regrout. That eliminates a recurring maintenance task entirely. If you also have porcelain areas in the home, those grout lines should be sealed on installation and resealed every one to two years with a penetrating silicone-based grout sealer.
A 16″ x 32″ plank tile reads large and slab-like, which visually opens up smaller rooms and reduces the number of grout-line interruptions across a floor. The longer dimension means layout planning matters — a skilled installer will center cuts and stagger joints to minimize lippage and keep the floor looking flat across the full field.
In many cases, yes — TRUCOR’s floating I4F click system can install over existing hard, flat surfaces without removal. The floor must be structurally sound, clean, and within acceptable flatness tolerance; any loose, cracked, or significantly uneven tiles underneath will need to be addressed before the new floor goes down. Flooring Queen will confirm suitability at the measure.
A single room — say, a master bath or bedroom — usually takes one day once material has acclimated. A whole-home project covering 1,500 to 2,000 square feet typically runs three to five days depending on layout complexity, the number of transitions, and any subfloor work needed. Large-format tile like this 16″ x 32″ size requires careful line-setting, which adds a bit of time compared to smaller-format products.
Flooring Queen installs Tile In Travertine Mist throughout Southwest Florida, including Cape Coral, Naples, Bonita Springs, and Estero, as well as the surrounding communities. If you’re scheduling from a seasonal property in any of those areas, the team can coordinate around your travel schedule and provide a quote before you arrive.
Ongoing costs are minimal. A pH-neutral hard-surface cleaner like Bona costs a few dollars per refill and is all you need for routine cleaning. There’s no sealer to apply, no refinishing cycle, and no professional maintenance required. The main recurring expense is replacing a microfiber mop pad every few months — a far lower cost of ownership than hardwood or grouted tile.
Flooring Queen has installed luxury vinyl and SPC plank for homes across Lee, Collier, and Charlotte counties. Single-location accountability — our installers, our supply chain, our quote. Free in-home measure: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
