Tile in Carrara Grey

Other colors in this collection:

Tile in Linear OatmealTile in Travertine GoldTile in Rust MetallicTile in Travertine BlancoTile in Marmo KhakiTile in Marmo WhiteMetal GrayNatural Deco

Specifications

Tile In Carrara Grey SPC Tile starts at $3.99 per square foot installed in Fort Myers — a marble-look floor with a white field and soft gray veining drawn from the classic Carrara aesthetic. TRUCOR’s TILE collection brings it to life on a 7.0 mm SPC core with a 20 mil wear layer, scaled up to a generous 16″ x 32″ format. The painted bevel edge and TRUWEAR finish complete the stone-like illusion without the stone-like weight on your wallet.

What Tile In Carrara Grey SPC Tile is built for

The 16″ x 32″ format and SPC core make this tile a natural fit for large open living areas, kitchens, bathrooms, and entryways — anywhere you want the clean sightlines of large-format tile without the cold underfoot feel or grout-intensive upkeep of porcelain. The I4F floating click system means no mortar, no extended cure time, and a much faster turnaround.

Southwest Florida conditions push hard on floors: slab-on-grade construction, coastal humidity, sandy foot traffic, and homes that sit empty for months at a time. The 100% waterproof SPC core handles all of that without swelling, buckling, or warping. IXPE underlayment is pre-attached, which helps with the slight imperfections common in older Fort Myers slabs.

Product Specifications

Construction SPC
Size 16″ x 32″
Thickness 7.0 mm
Wear Layer 20 mil / 0.5 mm
Attached Pad IXPE
Installation Method Floating
Installation Level Above, On, Below
Click System I4F
Edges Painted Bevel
Finish TRUWEAR
Warranty Limited Lifetime Residential / 15 Year Commercial

Installed pricing in Fort Myers & Southwest Florida

Flooring Queen installs Tile In Carrara Grey at $3.99 per square foot throughout Southwest Florida. That price covers removal of your existing flooring, delivery, standard subfloor preparation, installation, baseboards, and transition strips. Debris is hauled off the property when the crew wraps up — nothing left for you to deal with.

A few situations carry upcharges: significant floor leveling beyond routine prep, custom tile patterns or herringbone layouts, and stair nosing work. The best way to get a firm number is a free in-home measurement. We walk the rooms, check subfloor conditions, and hand you a written quote before any work begins.

How Tile In Carrara Grey SPC Tile compares

Porcelain tile is the obvious comparison for a Carrara-look large-format floor. Both achieve a clean, stone-inspired aesthetic — but the differences in installation, comfort, and cost are significant.

Porcelain requires mortar, grout, a cure period, and a rigid subfloor with zero flex. It installs at around $8.99/sq ft and feels cold to bare feet in air-conditioned homes. TRUCOR Tile floats on a click system, installs faster, and the IXPE underlayment softens the feel underfoot. Porcelain wins on long-term hardness and heat tolerance — it will outlast any vinyl in extreme conditions. But for a Fort Myers home where installation speed, budget, and comfort matter, the SPC version is a practical choice most homeowners end up preferring.

Tile in Carrara Grey Porcelain Tile
Water resistance 100% waterproof SPC core Waterproof tile, grout may stain
Scratch resistance / wear layer 20 mil TRUWEAR finish Extremely hard surface, no wear layer
Comfort underfoot Softer — IXPE pad attached Hard, cold in A/C environments
Installed price $3.99 / sq ft installed ~$8.99 / sq ft installed
Best room Living areas, baths, kitchens High-heat zones, outdoor transitions

Care & maintenance

Sweep or vacuum weekly using a soft-bristle attachment — avoid a rotating beater bar, which can scuff the surface over time. For mopping, use a damp mop with a pH-neutral cleaner such as Bona Stone, Tile & Laminate or a comparable hard-surface formula; avoid acidic cleaners, bleach solutions, and steam mops, all of which can break down the TRUWEAR finish and loosen the locking joints over time. Wipe up spills promptly — especially anything oily or pigmented — to prevent residue buildup in the painted bevel edges. No waxing, polishing, or refinishing is needed or recommended for this floor. For technical guidance, see the World Floor Covering Association vinyl flooring guide.

Frequently asked questions

Does the grout on an SPC tile like this need to be sealed, and how often?

TRUCOR Tile uses a floating click system, so there is no traditional mortar-set grout to seal. Transition areas and perimeter caulk lines should be inspected annually and recaulked if cracking appears, but no penetrating grout sealer is required. This is one maintenance step porcelain owners deal with that SPC tile avoids entirely.

What does that 16 by 32 inch format actually look like once it’s laid, and does it affect how tricky the install is?

At 16″ x 32″, each tile covers a lot of ground — large-format planks like this visually open up a room and reduce the number of grout lines you see. The I4F locking system keeps lippage tight, but longer tiles do require a reasonably flat subfloor. Flooring Queen checks for high and low spots before install to avoid edge telegraphing.

Can this floor go directly over existing tile or old vinyl, or does the old material have to come up first?

In many cases, yes — TRUCOR Tile’s floating I4F click system can install over structurally sound existing tile or vinyl without removal. The key variable is total floor height and whether the existing surface is flat and firmly bonded. We assess both during the pre-install measurement to confirm whether the old floor can stay or needs to go.

How many days should I set aside for a full-home install versus a single room?

A single room typically takes one day; a full home of 1,200 to 1,800 square feet usually runs two to three days. TRUCOR Tile’s click-lock floating system moves faster than mortar-set tile, and there’s no cure time waiting period before the floor is walkable. Final count depends on room layout complexity, furniture moving, and any subfloor corrections needed.

Tile floors in Florida — do they feel freezing cold when the A/C is running hard in summer?

SPC tile with IXPE underlayment runs noticeably warmer underfoot than porcelain or natural stone in an air-conditioned Florida home. The foam pad absorbs some of the chill that hard tile conducts from a concrete slab. It won’t feel like carpet, but most homeowners in Fort Myers find it comfortable barefoot year-round.

We have two large dogs — how well does this floor actually hold up to claws and accidents?

The 20 mil wear layer is one of the thicker options in the residential vinyl tile category, which means dog nails won’t easily scratch through to the print layer under normal activity. Accidents clean up with a damp cloth since the core is fully waterproof — no absorption, no odor retention in the floor itself. It’s one of the more pet-practical options we carry.

Why buy from Flooring Queen

We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.

Continue exploring:

Considering a different material?

Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.

Book Your Appointment