Silk Grey SPC Rigid-Core Plank starts at $3.99/sq ft installed in Fort Myers — a cool-toned gray floor from Alon Floors’ Space Collection built to handle the real demands of Southwest Florida living. Its 7.5 mm rigid core and 28 mil wear layer put it well above entry-level vinyl. If you want a clean, contemporary gray that works as hard as it looks good, this is a practical place to start.
Silk Grey is built for the full range of Southwest Florida conditions. The 100% waterproof polymer rigid core handles humidity, slab condensation, and the occasional spill or tracked-in pool water without swelling or buckling — problems that sideline real wood and standard laminate in this climate. The attached 2 MM IXPE pad cushions foot traffic and deadens sound on concrete slabs, which is the dominant foundation type from Cape Coral to Estero.
The 28 mil wear layer makes it a legitimate option for coastal rentals, vacation homes, and high-traffic households. Sandy floors, pet paws, and rolling luggage won’t cut through it quickly. It’s rated for both residential and commercial use, so it holds up whether you’re here year-round or just seasonally.
| Construction | 100% Waterproof Polymer Rigid Core |
|---|---|
| Plank Width | 7” |
| Plank Length | 48” |
| Thickness | 7.5 MM |
| Wear Layer | 28 mill wear layer |
| Attached Pad | 2 MM IXPE |
| Installation Method | Float |
| Click System | Valinge |
| Edges | EIR |
Flooring Queen installs Silk Grey at $3.99 per square foot, and that price is all-in for a standard project. It covers delivery to your home, removal and disposal of your existing flooring, surface preparation for a typical slab, the plank installation itself, baseboards, and transition strips between rooms or adjoining surfaces.
Certain conditions cost more: significant low spots or high areas requiring extensive leveling compounds, stair nosing, or layouts with custom borders or diagonal angles all carry additional charges. The best way to know exactly what your project runs is a free in-home measurement — Flooring Queen provides a written quote before any work begins, so there are no surprises on install day.
Waterproof laminate sits in the same general price range and delivers a similar wood-look aesthetic, so it’s a natural comparison. The key difference is the core. Silk Grey’s 100% polymer rigid core is genuinely impervious to moisture throughout — edge, face, and core alike. Most waterproof laminates resist surface water well but can still be vulnerable at seams or edges if water pools and sits for extended periods. In Southwest Florida, where humidity is constant and flooding is a seasonal reality, that distinction matters.
On the other side, some shoppers find laminate’s surface texture more convincing underfoot, and certain laminate lines offer longer plank formats. Silk Grey’s 28 mil wear layer, however, outperforms most laminate AC-ratings for scratch and scuff durability, which is where the SPC earns its keep in a busy household.
| Silk Grey | Waterproof Laminate | |
|---|---|---|
| Water resistance | 100% waterproof core and surface | Surface-resistant; seam vulnerability |
| Scratch resistance / wear layer | 28 mil commercial-grade wear layer | Varies; typically AC3–AC4 rating |
| Comfort underfoot | 2 MM IXPE pad attached | HDF core; pad often required separately |
| Installed price | $3.99/sq ft installed | $4.50/sq ft installed |
| Best room | Any room, including wet areas | Dry to low-moisture rooms |
Sweep or vacuum Silk Grey regularly to clear sand and grit — these are the main culprit for surface dulling over time, especially in coastal Southwest Florida homes. For mopping, use a damp (not soaking wet) mop with a pH-neutral vinyl floor cleaner such as Bona Stone, Tile & Laminate or a diluted Rejuvenate floor cleaner. Avoid steam mops entirely — the heat and pressure can compromise the click joints and the attached IXPE pad over repeated use. Stay away from abrasive scrubbers, wax-based polishes, or solvent cleaners, which can cloud or soften the wear layer. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Silk Grey has a 100% waterproof polymer rigid core, meaning moisture cannot penetrate the plank itself — not just the surface. Standing water from a burst pipe or a Florida storm surge won’t cause the core to swell or buckle. The main risk with any floating floor is water that works beneath the planks through gaps at walls, so keeping baseboards properly sealed matters.
The 28 mil wear layer on Silk Grey is thick enough to resist everyday claw traffic from large dogs without visible scratching under normal conditions. Cleanup is straightforward — the waterproof core means pet urine won’t soak into the plank. For context, 28 mil is well above the 12 mil typical on builder-grade vinyl and is commonly specified for commercial applications.
Flooring Queen installs Silk Grey throughout the Fort Myers metro and surrounding communities, including Cape Coral and Bonita Springs. Service generally extends across Lee and Collier counties — if you’re unsure whether your address falls within range, a quick call confirms it before scheduling a measure visit.
Alon Floors does not publish specific warranty terms in the product data available here. For SPC rigid-core planks in this category, manufacturer warranties typically cover structural defects and wear-through of the wear layer under normal use. Ask Flooring Queen for the current warranty documentation before purchase — the terms should be in writing before you commit.
Silk Grey is approved for both residential and commercial applications and installs as a floating floor using the Valinge angle-click system, making it suitable above-grade and on slab. It works in kitchens, bathrooms, living areas, and bedrooms. The one area to discuss with your installer is any room with significant subfloor height variation — leveling needs affect the final outcome regardless of plank quality.
Silk Grey can often float directly over existing hard surfaces like tile or vinyl, provided the existing floor is flat, firmly bonded, and free of major height transitions. The Valinge angle-click system is designed for floating installation, so no glue-down is required. Your installer will check for lippage and uneven grout lines during the measure — those sometimes need grinding before the new planks go down.
We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
