Prime Xl 12 In Burnaby Oak SPC Rigid-Core Plank starts at $3.99/sq ft installed in Fort Myers — a warm caramel oak-look floor built on TRUCOR’s rigid-core technology. Part of the PRIME XL 12 collection, it pairs wide 12″×72″ planks with a hand-scraped bevel edge for a convincing hardwood appearance. The caramel tone reads as a natural mid-tone brown, versatile enough to anchor open-plan living spaces or anchor a master suite.
Southwest Florida homes put floors through a specific kind of stress: slab foundations that conduct ground moisture, salt-humid air that cycles daily, and seasonal vacancies where nobody’s running the AC. The WPC core construction in this plank resists that moisture cycle from the slab up, and the IXPE attached pad acts as a buffer between the rigid core and the concrete below.
At 12 mm thick with a 20 mil wear layer, this floor handles high-traffic entry points, active family areas, and rental properties equally well. The Valinge locking system and floating installation also mean it can go above, on, or below grade — practical for the mixed-level floor plans common throughout Lee County and Collier County.
| Construction | WPC |
|---|---|
| Size | 12″ x 72″ |
| Thickness | 12 mm |
| Wear Layer | 20 mil / 0.5 mm |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge |
| Edges | Round Bevel |
| Finish | TRUWEAR™ |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime Xl 12 In Burnaby Oak at $3.99 per square foot throughout Southwest Florida. That price covers delivery to your home, removal and disposal of your existing flooring, standard subfloor preparation, the full floating installation, baseboard reinstallation, and transition strips between rooms.
A few things fall outside the base price: significant subfloor leveling where height variations exceed standard tolerances, stair nosing and stair treads (available as a matching molding option), and any custom layout patterns such as herringbone or diagonal runs. We offer a complimentary in-home measurement and a written quote before any work begins, so you know the full number upfront.
Shoppers drawn to the caramel oak color of Burnaby Oak often consider engineered hardwood for the same look. The honest difference comes down to moisture tolerance and long-term cost. Engineered hardwood carries a real wood veneer that genuinely expands and contracts with humidity — not ideal for slab construction or Florida coastal air without careful acclimation. This SPC plank is fully waterproof at its core and won’t cup or buckle if a pet knocks over a water bowl or a sliding door lets in rain.
Where engineered hardwood wins: it can be lightly sanded and refinished once or twice, potentially extending its look over decades. This plank cannot be refinished. For Fort Myers rentals, vacation properties, or any room near water, the SPC holds up with less maintenance and installs at a lower price point.
| Prime XL 12 in Burnaby Oak | Engineered Hardwood | |
|---|---|---|
| Water resistance | Waterproof WPC core, all grades | Susceptible to moisture; not below-grade |
| Scratch resistance / wear layer | 20 mil TRUWEAR™ finish | Thin real-wood veneer, refinishable |
| Comfort underfoot | 12 mm + IXPE pad attached | Slightly warmer; thinner pad standard |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Any room, any grade level | Above-grade, low-humidity rooms |
Sweep or dry-mop this floor regularly — Florida’s sandy soil is the biggest threat to any wear layer, and grit left underfoot acts like sandpaper. For damp mopping, use a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted Simple Green Naturals; avoid anything acidic or abrasive. Never use a steam mop on SPC rigid-core planks — the sustained heat and moisture can weaken the locking joints and void the manufacturer warranty. Wipe spills promptly, but standing water on the surface won’t damage the core. Felt pads under furniture legs are worth the small investment. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
The WPC core in Burnaby Oak is genuinely waterproof — standing water on the surface or seeping beneath a floating plank won’t cause the core to swell or buckle. That said, prolonged water intrusion at the walls or subfloor level is a structural concern regardless of floor type, so proper perimeter sealing still matters.
The 20 mil TRUWEAR™ wear layer gives this floor solid resistance to everyday claw traffic; most pet scratches won’t penetrate to the decorative layer. Accidents clean up without staining or soaking in because the surface is non-porous. For very large, active dogs, felt pads under furniture and regular nail trims will extend the floor’s appearance over time.
Burnaby Oak ships with an IXPE pad already bonded to the back of each plank, so no separate underlayment purchase is needed for most installations. The attached pad softens foot impact, reduces hollow sound on slab, and adds a small layer of thermal insulation — a practical benefit in Fort Myers homes built on concrete.
In the Southwest Florida market, quality SPC flooring in good condition does not meaningfully hurt resale value, and in some buyer segments it’s preferred over wood because of the waterproof benefit. Buyers here are water-conscious; a floor that won’t buckle after a plumbing leak or humidity spike is a selling point, not a downgrade.
A single room typically takes one day or less; a full home in the 1,500–2,500 sq ft range usually runs two to three days depending on room count and furniture moving. Burnaby Oak’s floating click-lock system is straightforward to install, so there’s no adhesive cure time adding to the schedule. We’ll confirm a realistic timeline when we measure your home.
TRUCOR backs Burnaby Oak with a limited lifetime warranty for residential use and a 15-year warranty for commercial applications. Coverage addresses manufacturing defects, wear-through of the surface finish, and structural integrity of the locking system under normal use conditions. Keep your purchase documentation — warranty claims require proof of professional installation and evidence of proper care.
When you buy LVP from Flooring Queen, our crew handles delivery, tear-out, prep, install, and trim — no subs, no surprises. One showroom in Fort Myers, one team accountable from quote to final baseboard. Call (239) 763-0770 for a free measure.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
