Prime X 7 in Malabar Oak

Other colors in this collection:

Tile in Linear OatmealTile in Travertine GoldTile in Rust MetallicTile in Travertine BlancoTile in Marmo KhakiTile in Marmo WhiteMetal GrayNatural Deco

Specifications

Prime X 7 In Malabar Oak SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a natural oak-toned floor from TRUCOR’s PRIME X 7 collection that brings warm, earthy wood character to any room. At 12 mm thick with a 20 mil wear layer, it’s built to perform, not just look good. Flooring Queen installs it throughout Southwest Florida with full-service pricing and no surprises.

What Prime X 7 In Malabar Oak SPC Rigid-Core Plank is built for

With its ability to install above, on, or below grade, Malabar Oak is a natural fit for Florida’s concrete slab construction. The rigid SPC core won’t buckle in humidity, and the attached IXPE pad cushions the floor against the hard, unforgiving surfaces common in Southwest Florida homes.

The 20 mil TRUWEAR finish holds up to the kind of daily abuse that coastal living produces — tracked-in sand, salt air, and the heavy foot traffic typical in snowbird properties or short-term rentals. For investors managing multiple units or homeowners who want a floor that asks very little of them, this plank delivers.

Product Specifications

Construction WPC
Size 7″ x 72″
Thickness 12 mm
Wear Layer 20 mil
Attached Pad IXPE
Installation Method Floating
Installation Level Above, On, Below
Click System Valinge 2G
Edges Rolled Edge
Finish TRUWEAR
Warranty Limited Lifetime Residential / 15 Year Commercial

Installed pricing in Fort Myers & Southwest Florida

Flooring Queen installs Malabar Oak at $3.99 per square foot, an all-in price that covers delivery, removal of your existing floor covering, standard subfloor preparation, installation of the planks, baseboard reattachment, and transition strips between rooms. Old material is carted away at no extra charge.

Certain conditions carry an upcharge: significant subfloor leveling beyond minor spot work, stair nosing installations, or custom layout patterns like herringbone. A free in-home measurement appointment produces a written, itemized quote so you know the exact number before any work begins.

How Prime X 7 In Malabar Oak SPC Rigid-Core Plank compares

Malabar Oak and engineered hardwood share a convincing wood look, but they handle Florida’s environment very differently. Engineered hardwood tolerates moderate humidity, but a wet floor from a pet accident, plumbing leak, or open window during a storm can cause swelling or delamination. The SPC core in Malabar Oak is fully waterproof through the plank — not just the surface.

Engineered hardwood does offer something this product can’t: it can often be lightly sanded and refinished, extending its life in ways rigid vinyl cannot match. For dry, climate-controlled spaces where that longevity matters, hardwood has the edge. For kitchens, bathrooms, laundry rooms, and rental properties in coastal Southwest Florida, Malabar Oak is the more practical call.

Prime X 7 in Malabar Oak Engineered Hardwood
Water resistance Fully waterproof SPC core Surface-resistant; prolonged moisture causes damage
Scratch resistance / wear layer 20 mil commercial-grade wear layer Finish coat only; thinner and refinishable
Comfort underfoot 12 mm with attached IXPE pad Slightly warmer; softer feel on wood subfloor
Installed price $3.99 per sq ft installed Approx. $8.99 per sq ft installed
Best room Any level, wet or dry areas Dry above-grade rooms only

Care & maintenance

Sweep or vacuum with a soft-bristle attachment regularly to clear the sand and grit that’s unavoidable in Southwest Florida homes — fine particles act like sandpaper on the finish over time. Damp-mop with a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted Rejuvenate formula; avoid anything acidic or abrasive. Never use a steam mop on SPC — sustained heat and pressure can compromise the locking joints and void the warranty. Wipe spills promptly and keep felt pads under furniture legs to prevent concentrated point pressure on the wear layer. For technical guidance, see the World Floor Covering Association vinyl flooring guide.

Frequently asked questions

Will standing water actually damage this floor, or just the surface?

Malabar Oak is waterproof through its SPC rigid core, meaning standing water won’t swell or warp the plank itself. That said, water that migrates beneath the floor for extended periods can affect the subfloor underneath, so prompt cleanup and proper perimeter sealing during installation still matter.

My dogs are rough on floors — how well does this hold up to claws and accidents?

The 20 mil wear layer on Malabar Oak is a commercial-grade rating that resists everyday pet scratching better than standard residential vinyl. Accidents clean up without staining because the surface is waterproof. For very large or high-energy dogs, adding felt pads under furniture reduces the concentration of impact in traffic zones.

What’s the real difference between SPC and the cheaper LVP I keep seeing at the big-box stores?

SPC (stone polymer composite) uses a denser, mineral-filled core that won’t flex or indent under heavy loads the way standard LVP can. Malabar Oak is an SPC product, which means it resists denting from furniture legs, stays flat on uneven subfloors better, and holds its dimensional stability in Florida’s temperature swings — traits that thinner LVP cores struggle to match.

What does the TRUCOR warranty actually cover on this product?

TRUCOR provides a limited lifetime warranty for residential use and a 15-year warranty for commercial installations. Coverage typically addresses manufacturing defects, wear-through of the finish under normal use, and structural integrity of the core. Review the downloadable warranty document for exclusions — damage from improper installation, flooding from exterior sources, and misuse are common exceptions across the industry.

Does putting in vinyl plank help or hurt when it’s time to sell in Southwest Florida?

Quality SPC vinyl plank is broadly neutral to modestly positive for resale in Southwest Florida, particularly in entry-level to mid-range homes where buyers prioritize durability and low maintenance. Luxury buyers may prefer hardwood or tile. A well-installed, consistent floor throughout the home photographs well and signals move-in readiness, which matters in this market.

How long does a whole-home installation typically run from start to finish?

A single room generally takes one day; a full home of 1,200–1,800 square feet typically runs two to three days once materials are on-site. Malabar Oak uses a floating Valinge 2G click system, which is straightforward for experienced installers and doesn’t require adhesive cure time. Your Flooring Queen quote will include a projected schedule based on your actual square footage.

Why buy from Flooring Queen

Flooring Queen has installed luxury vinyl and SPC plank for homes across Lee, Collier, and Charlotte counties. Single-location accountability — our installers, our supply chain, our quote. Free in-home measure: (239) 763-0770.

Continue exploring:

Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.

Book Your Appointment