Prime In Toccoa Pine SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a warm caramel wood-look floor from TRUCOR’s Prime collection with genuine knot detail and a micro-beveled edge that reads like real pine without the maintenance headaches. It’s a wide-format plank at 9″ by 60″, so it lays out with that relaxed, open-grain character that works well in coastal and inland Southwest Florida homes alike.
Southwest Florida’s combination of slab foundations, high humidity, and salt-influenced air makes a rigid-core build essential. The stone-plastic composite core here won’t swell when humidity swings — a real issue in coastal Fort Myers homes where the air rarely gets a break. The IXPE attached pad adds a slight thermal buffer over cool concrete, and the floor is rated for below-grade installs, so finished garages and ground-floor flex rooms are fair game.
The 20 mil wear layer and TRUWEAR™ finish hold up well in rental units and snowbird homes where traffic comes in waves rather than daily wear. Heavier furniture, sandy floors tracked in from the beach, and pets moving through regularly are normal scenarios this floor is built to handle.
| Construction | WPC |
|---|---|
| Size | 9″ x 60″ |
| Thickness | 7.5 mm |
| Wear Layer | 20 mil / 0.5 mm |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge |
| Edges | Micro Bevel |
| Finish | TRUWEAR™ |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime in Toccoa Pine at $3.99 per square foot throughout Southwest Florida. That price covers material delivery, removal of your old floor covering, standard subfloor prep, floating installation, baseboard reinstallation, and transition strips between rooms. Haul-away of the old material is part of the job — nothing left behind for you to deal with.
Work that falls outside standard prep — significant leveling for out-of-plane slabs, stair nosing installation, or complex room layouts with custom borders — is quoted separately. Request a free in-home measure and you’ll receive a written line-item quote before any work is scheduled, so the number you approve is the number on the final invoice.
TRUCOR Prime in Toccoa Pine and engineered hardwood both target the same warm wood aesthetic, but they perform differently in Southwest Florida’s environment. The SPC core is fully waterproof — spills, pet accidents, and humidity swings won’t cause warping or swelling. Engineered hardwood has a real wood veneer, so it can be refinished once or twice to freshen the surface, but it is not waterproof, and repeated moisture exposure will cause the core layers to degrade over time.
Engineered hardwood costs roughly $8.99 per square foot installed, more than twice the price here. The SPC plank wins on price and moisture resistance; engineered hardwood wins on the look and feel of genuine wood grain and the option to sand and refinish down the road.
| Prime in Toccoa Pine | Engineered Hardwood | |
|---|---|---|
| Water resistance | Waterproof rigid SPC core | Moisture-sensitive; warps with exposure |
| Scratch resistance / wear layer | 20 mil (0.5 mm) TRUWEAR™ finish | Depends on veneer thickness; can refinish |
| Comfort underfoot | IXPE pad attached; firm with slight cushion | Natural wood feel; no attached pad |
| Installed price | $3.99 / sq ft installed | ~$8.99 / sq ft installed |
| Best room | Any grade, wet or humid spaces | Above-grade, climate-controlled rooms only |
Sweep or dust-mop Prime in Toccoa Pine regularly to keep fine grit — especially the sand that finds its way into every Southwest Florida home — from acting as an abrasive underfoot. For damp cleaning, use a pH-neutral vinyl floor cleaner such as Bona Stone, Tile & Laminate or a diluted Rejuvenate formula; avoid anything acidic or solvent-based. Skip steam mops entirely — the heat and moisture pressure can compromise the locking joints and the attached IXPE pad over time. Wring mop heads thoroughly so you’re cleaning with a damp surface, not a wet one. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Prime in Toccoa Pine has a fully waterproof SPC core, meaning standing water on the surface won’t swell or warp the plank itself. That said, water that seeps into seams and sits beneath the floor long-term is a different issue — prompt cleanup of pooled water and proper perimeter sealing at install protect the subfloor underneath.
The 20 mil wear layer on this plank is one of the thicker options in the vinyl category, and the TRUWEAR™ finish resists surface scratching from pet nails better than thinner 6–12 mil products. Cleanup of accidents is straightforward since the core is waterproof — urine won’t penetrate and stain the way it can with hardwood or carpet.
This plank has an IXPE pad factory-attached to the back, so no separate underlayment purchase is needed. The IXPE layer softens the feel underfoot on hard concrete slabs, reduces hollow footfall sound, and adds a mild thermal layer — useful for ground-floor rooms in Southwest Florida homes where slab temps can run cool in winter.
A single room of average size usually goes down in a day with a floating installation like this one. A full home — say, 1,200 to 1,500 square feet — typically runs two to three days including old-floor removal, prep, and trim work. Your Flooring Queen quote will include a project-specific timeline based on your actual square footage and room count.
SPC rigid-core floors handle temperature and humidity cycling significantly better than wood-based products, making them a practical choice for snowbird and seasonal homes. The stone-plastic composite core doesn’t expand and contract the way engineered hardwood or laminate does when a home swings from air-conditioned to ambient Florida heat and back again over the summer months.
Prime in Toccoa Pine is rated for above-grade, on-grade, and below-grade installation, which means it works in virtually every room in a Florida home — living areas, bedrooms, kitchens, bathrooms, and even finished garages. The only scenarios where you’d consider something else are outdoor exposed areas or rooms with radiant heat systems, which are not referenced in the product specifications.
Flooring Queen has installed luxury vinyl and SPC plank for homes across Lee, Collier, and Charlotte counties. Single-location accountability — our installers, our supply chain, our quote. Free in-home measure: (239) 763-0770.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
