Cyrus Walnut Waves Luxury Vinyl Planks SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a rich walnut-toned floor from MSI Surfaces’ CYRUS collection that mimics natural wood grain without the moisture vulnerability real wood brings to Southwest Florida homes. The warm, wavy walnut finish works equally well in open-plan living areas and tight coastal cottages.
Southwest Florida is hard on floors: concrete slab construction pulls up cold moisture from below, coastal humidity never really lets up, and sandy foot traffic grinds at finishes year-round. The rigid SPC core in Walnut Waves resists both moisture and the minor flex common in slab homes, staying dimensionally stable where traditional wood planks would cup or gap.
The 12-mil wear layer handles pet nails, dragged furniture, and the gritty sand that comes in from the beach or lanai. It’s a sensible pick for rental units and seasonal properties that see heavy rotation — durable enough to stand up, easy enough to clean between turnovers.
| Thickness | 5MM |
|---|---|
| Wear Layer | 12MIL |
| Warranty | Lifetime Limited Residential; 10-Year Limited Light Commercial |
Flooring Queen’s all-in installed price for SPC Rigid-Core planks is $3.99 per square foot. That covers delivery to your home, removal of your current flooring, subfloor cleaning and minor surface prep, installation of the planks, and fitting of baseboards and transition strips. Debris is hauled off when the crew leaves — no dumpster to rent.
A few items fall outside the flat rate: significant subfloor leveling (more than minor high spots), stair nosing, decorative inlays, or unusually complex room layouts. Contact Flooring Queen for a free in-home measurement and a written quote that spells out exactly what’s included before any work begins.
Both Walnut Waves and engineered hardwood aim for a wood look underfoot, but they behave very differently in Southwest Florida’s climate. Engineered hardwood has a real wood veneer that looks and feels like the genuine article — and can often be lightly sanded and refinished once. That’s its edge. But it’s still wood at the surface, which means humidity swings, standing water near a sink or sliding door, and high-traffic pet households will shorten its lifespan.
Walnut Waves is 100 percent synthetic through and through. Its rigid SPC core won’t swell, and the 12-mil wear layer doesn’t dent or scratch the way a thin veneer can. The trade-off is that it cannot be refinished — once the wear layer is gone, replacement is the only path. For most Fort Myers homeowners, the moisture tolerance and lower installed cost tip the decision toward SPC.
| Cyrus Walnut Waves Luxury Vinyl Planks | Engineered Hardwood | |
|---|---|---|
| Water resistance | 100% waterproof core | Moisture-sensitive veneer layer |
| Scratch resistance / wear layer | 12-mil synthetic wear layer | Thin wood veneer, refinishable once |
| Comfort underfoot | Firm; rigid core, slight give | Warmer, softer wood feel |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Kitchens, baths, laundry, whole-home | Dry living areas, bedrooms |
Sweep or vacuum regularly — a hard-floor vacuum setting (no rotating beater bar) keeps grit from grinding against the wear layer. For mopping, use a damp — not soaking — microfiber mop with a pH-neutral cleaner like Bona Hard-Surface Floor Cleaner or a diluted dish soap solution. Avoid steam mops entirely: the sustained heat can soften the adhesive bond and warp the planks over time. Acidic or abrasive cleaners will dull the finish and are not recommended. Wipe spills promptly, especially near baseboards where water can wick under the edges. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Walnut Waves has a fully waterproof SPC core, so standing water won’t swell or buckle the planks themselves. The risk area is the perimeter — water that sits against baseboards or seeps under the edge can reach the subfloor below. Clean up puddles promptly and keep caulk tight along wet-area walls.
The 12-mil wear layer holds up well against everyday pet claws, which is above the minimum recommended for households with large dogs. It won’t show the fine scratches a thinner wear layer would pick up as quickly. Cleanup is straightforward: a damp mop handles most pet messes without special products.
A single average room typically takes one day. A full home — say, 1,200 to 1,500 square feet — usually runs two to three days depending on room count and layout complexity. SPC planks click together without glue, which keeps the process moving. Flooring Queen will give you a project-specific schedule during the quoting visit.
SPC Rigid-Core construction is significantly more stable through temperature and humidity swings than wood or standard LVP. Walnut Waves can tolerate the heat cycles of a closed Florida home better than engineered wood. Setting your thermostat to around 78–80°F while away keeps conditions within a reasonable range and protects the floor long-term.
Regular LVP has a flexible PVC core that can telegraph subfloor imperfections and feel slightly soft underfoot. SPC (Stone Plastic Composite) uses a rigid mineral-filled core that’s denser and more dimensionally stable. For Florida slab homes where minor surface variations are common, the rigid core bridges small inconsistencies better and resists indentation from heavy furniture.
MSI Surfaces backs Walnut Waves with a Lifetime Limited Residential warranty and a 10-Year Limited Light Commercial warranty. Residential coverage applies to manufacturing defects for as long as you own the home. The light-commercial term covers qualifying low-traffic business settings for ten years. Review MSI’s warranty document for exclusions around improper installation or moisture damage from flooding.
We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
