Cyrus Chester Hills Luxury Vinyl Planks SPC Rigid-Core Plank starts at $3.99/sq ft installed in Fort Myers — a natural-toned wood-look floor from MSI Surfaces’ Cyrus collection that brings warmth and stability to Southwest Florida homes. Chester Hills reads as an organic, grounded neutral, neither too warm nor too cool. At 5MM thick with a rigid stone-plastic core, it reads and feels like real hardwood while handling every demand Florida living throws at it.
Southwest Florida is hard on flooring. Humidity swings, concrete slab foundations, and the occasional tracked-in sand are a daily reality. Chester Hills’ SPC rigid core doesn’t expand and contract the way traditional wood or even WPC vinyl does — it stays flat and locked even when interior humidity shifts with the seasons.
That stability makes it a smart pick for kitchens, bathrooms, laundry rooms, and any common area that sees heavy foot traffic. Coastal homes with salt-air exposure, snowbird properties that sit vacant through summer, and long-term rentals all benefit from a 12-mil wear layer backed by a lifetime residential warranty.
| Thickness | 5MM |
|---|---|
| Wear Layer | 12MIL |
| Warranty | Lifetime Limited Residential; 10-Year Limited Light Commercial |
Flooring Queen installs Chester Hills SPC planks at $3.99 per square foot — a complete price that covers delivery, removal of your old floor covering, standard subfloor prep, the install itself, new baseboards, and transition strips between rooms. Debris is taken off-site when the crew leaves.
Some situations do carry upcharges: significant subfloor leveling beyond routine prep, stair nosing, intricate diagonal or herringbone layouts, and custom border inlays are all quoted separately. Contact us to schedule a no-cost in-home measure and you’ll walk away with a written, room-by-room price before any commitment is made.
Shoppers drawn to a natural wood look often weigh SPC vinyl against engineered hardwood, and the trade-offs are real on both sides. Chester Hills wins on moisture tolerance — its rigid core is fully waterproof, which engineered hardwood is not. Spills, pet accidents, and the humidity that rolls through Southwest Florida homes are handled without risk of cupping or swelling. It also installs at a noticeably lower price point.
Engineered hardwood wins on feel and resale perception. It has a real wood veneer that can sometimes be lightly sanded and refinished, and some buyers in higher-end markets still prefer it. If budget and moisture performance are the primary concerns, SPC is the more practical choice for most Fort Myers households.
| Cyrus Chester Hills Luxury Vinyl Planks | Engineered Hardwood | |
|---|---|---|
| Water resistance | Fully waterproof rigid core | Moisture-sensitive; can cup or swell |
| Scratch resistance / wear layer | 12-mil commercial-grade wear layer | Real wood veneer; scratches show |
| Comfort underfoot | Firm; no give without pad | Slightly warmer, natural feel |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Kitchens, baths, whole-home | Bedrooms, low-humidity living rooms |
Chester Hills SPC plank cleans up with a dust mop or soft-bristle vacuum — skip any vacuum with a rotating beater bar, which can scuff the wear layer over time. Damp-mop with a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted dish soap solution; avoid anything with ammonia, bleach, or acetone. No steam mops — repeated high-heat moisture can compromise the click joints and void the warranty. Wipe standing water promptly even though the core won’t absorb it, since moisture can still migrate under the planks through edges and seams. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Chester Hills has a waterproof SPC rigid core, meaning bulk water won’t swell or warp the plank itself. That said, water that sits against baseboards or seeps through seams over a long period can affect the subfloor beneath. Clean up puddles promptly and keep perimeter caulk in good shape.
The 12-mil wear layer on Chester Hills is rated for light commercial use, which in a residential home means it handles normal dog nails, claws, and daily scrambling well. Dragging heavy furniture without pads or very large, high-energy dogs with untrimmed nails can still leave marks over time.
A single room typically takes one day. A full home of 1,000–1,500 sq ft usually runs two to three days depending on room count and layout complexity. SPC click-lock installs quickly, but time adds up with furniture moving, transitions, and any subfloor prep needed before the planks go down.
The product facts for Chester Hills do not specify attached underlayment, so plan to discuss pad options with your Flooring Queen installer before the project starts. A separate underlayment can reduce sound transmission and add a small amount of softness underfoot, particularly over concrete slab — common in Southwest Florida homes.
Ongoing costs are minimal. A bottle of pH-neutral cleaner runs a few dollars and lasts months. There’s no refinishing, no resealing, and no special equipment required. The main ongoing expense is replacing a damaged plank if one gets gouged — keeping a box of leftover planks on hand from your install is the simplest insurance.
In the Fort Myers and broader Southwest Florida market, quality LVP is broadly accepted by buyers and appraisers as a practical, durable finish that holds up in the climate. It won’t command the same premium perception as hardwood in luxury listings, but it won’t hurt value either — and buyers often prefer a floor they don’t have to replace immediately.
Twenty years of installing waterproof vinyl in Southwest Florida means we know which SPC cores hold up to slab moisture and which don’t. Licensed, insured, family-run. Written installed quote before any work starts: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
