Creme Brulee SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a warm natural-tone floor from CPF Floors’ Spirit XL collection that reads like lightly worn hardwood without any of the wood’s vulnerabilities. The 9×60-inch planks run long and wide, giving rooms an open, unhurried feel. It’s a low-drama choice that works hard in the background while the rest of the room does the talking.
Southwest Florida puts floors through more than most climates do. Coastal humidity, concrete slab foundations, sandy tracked-in grit, and the stop-and-go schedule of seasonal homes all shorten the life of flooring that wasn’t built for the conditions. Creme Brulee’s 100% waterproof rigid core won’t swell, buckle, or separate when humidity climbs — making it a practical fit for kitchens, bathrooms, laundry rooms, and covered lanais.
The 22 mil wear layer is thick enough for General Commercial traffic ratings, which means it shrugs off the daily grind in full-time residences and rental properties alike. The rigid 6mm core resists the minor unevenness that concrete slabs develop over time, and the 2mm attached HD EVA pad softens the feel underfoot without requiring a separate underlayment purchase.
| Product Type | Rigid Core Vinyl |
|---|---|
| Size | 9″x60″ |
| Thickness | 8mm |
| Wear Layer | 22 Mil |
| Traffic Class | 23-33 Heavy Residential / General Commercial |
| Attached Pad | 2mm HD EVA PAD |
| Installation Method | Angle – Angle |
Flooring Queen installs Creme Brulee at $3.99 per square foot across Southwest Florida. That price covers everything a standard job needs: delivery to your home, pulling up and removing your old flooring, surface preparation for typical conditions, the flooring itself, baseboards, and transition strips between rooms or doorways. No surprise line items on a routine installation.
A few things do carry an upcharge: significant subfloor leveling (more than minor skim-coating), stair nosing, and any custom inlay or border work. To find out exactly what your project will cost, schedule a free in-home measure — our estimator walks every room, checks subfloor conditions, and hands you a written quote before any work begins.
Waterproof laminate and SPC vinyl look similar in a showroom and carry overlapping price points, so it’s a fair comparison. The biggest practical difference is the core. SPC rigid core is made from stone-composite material that is genuinely impervious to moisture — you can leave standing water on it without fear. Waterproof laminate resists surface splashes but the core can still absorb moisture at the seams over time, making it a weaker choice for bathrooms or laundry rooms.
Where laminate sometimes wins is in the feel underfoot — some shoppers find it warmer and more solid-sounding. SPC with an attached pad narrows that gap considerably. On installed price, both materials sit close to each other, so the decision usually comes down to where the floor is going and how much moisture that room actually sees.
| Creme Brulee | Waterproof Laminate | |
|---|---|---|
| Water resistance | 100% waterproof rigid core | Surface-resistant; seams can absorb moisture |
| Scratch resistance / wear layer | 22 mil wear layer; heavy commercial rated | AC3-AC4 typical; varies by product |
| Comfort underfoot | 2mm HD EVA pad attached | Slightly warmer feel; pad often separate |
| Installed price | $3.99/sq ft installed | ~$4.50/sq ft installed |
| Best room | Kitchens, baths, laundry, whole-home | Living areas, bedrooms; avoid wet rooms |
Keep Creme Brulee clean with a dry microfiber mop for daily dust and grit — fine sand is one of the fastest ways to dull any wear layer, and Southwest Florida homes collect plenty of it. For wet cleaning, use a pH-neutral vinyl floor cleaner such as Bona Stone, Tile & Laminate or a diluted solution of plain dish soap; avoid anything acidic or alkaline. Never use a steam mop on SPC vinyl — the concentrated heat can soften the adhesive bond between layers and cause planks to shift or warp over time. Skip the beater-bar attachment on your vacuum as well; a hard-floor setting is all you need. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Creme Brulee has a 100% waterproof rigid core, meaning standing water won’t damage the plank itself. The core does not swell or delaminate from moisture exposure. The important caveat: water that migrates beneath the floor into the subfloor is a subfloor issue, not a flooring issue, and that’s true of any floating floor.
The 22 mil wear layer on Creme Brulee is rated for heavy residential and general commercial traffic, which puts it well above what most pet households demand. It resists surface scratching from claws better than softer wear layers, and cleanup from accidents is straightforward since the core won’t absorb liquid if you catch spills reasonably quickly.
SPC (stone polymer composite) has a rigid core made from limestone powder and PVC, while traditional LVP uses a softer, more flexible core. Creme Brulee is SPC, which means it resists denting under heavy furniture and stays flat over uneven subfloors better than flexible LVP. The trade-off is that SPC can feel slightly harder underfoot, though the attached pad helps.
Creme Brulee includes a 2mm HD EVA pad pre-attached to each plank, so you don’t need to purchase or lay a separate underlayment. That pad reduces hollow sound when you walk across the floor and takes a little edge off the hardness of the rigid core — both things you’d otherwise be buying separately with other SPC products.
A single room install is usually a one-day job for our crew. A whole-home project in a typical Southwest Florida home — say 1,200 to 1,800 square feet — generally runs two to three days depending on layout complexity and how much old flooring comes up. The angle-angle installation method on Creme Brulee is efficient and doesn’t require adhesive, which keeps the timeline tight.
Concrete slab is actually the ideal substrate for Creme Brulee. SPC rigid core is designed to float directly over concrete, and the waterproof core means ground-level moisture vapor from the slab won’t cause the planks to swell or buckle. As long as the slab is reasonably flat — we check this during the measure — no special barrier is required.
We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
