Prime X 7 In Sawdust Oak SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a warm honey-toned oak floor built to handle the demands of Southwest Florida living without the vulnerabilities of real wood. TRUCOR’s Prime X 7 collection delivers a 12 mm rigid core, a 20 mil wear layer, and a realistic rolled-edge plank in a wide 7″ x 72″ format that reads as genuine hardwood from across the room.
This plank is built for the realities of Florida construction: concrete slab subfloors, persistent humidity, and the kind of moisture intrusion that makes solid wood a gamble. The flooring installs above, on, or below grade, which means it works in any room of the house — kitchens, bathrooms, first-floor living areas, and even finished garages.
For seasonal and rental properties, the 20 mil wear layer and TRUWEAR finish hold up under heavy foot traffic without requiring refinishing between tenants or seasons. Salt-air coastal homes benefit from the fully waterproof rigid core, and sandy foot traffic is no match for the scratch-resistant surface.
| Construction | WPC |
|---|---|
| Size | 7″ x 72″ |
| Thickness | 12 mm |
| Wear Layer | 20 mil |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge 2G |
| Edges | Rolled Edge |
| Finish | TRUWEAR |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime X 7 In Sawdust Oak at $3.99 per square foot throughout Southwest Florida. That price covers delivery, removal of your old flooring, standard subfloor prep, installation, baseboards, and transition strips — plus cleanup and material haul-off when the job is done.
Some work runs extra: significant subfloor leveling, stair nosing and tread installation, or unusually complex layouts with custom borders or diagonal runs. We offer a free in-home measurement and a written quote before any work begins, so you know the full number up front with no surprises on invoice day.
Sawdust Oak and engineered hardwood chase the same look — a warm, wide-plank oak floor — but they behave very differently in a Florida home. Engineered hardwood has a real wood veneer that responds to humidity changes: it can cup, gap, or swell when moisture levels swing, which they do year-round here. Prime X 7’s rigid WPC core doesn’t move with humidity, making it the safer choice for slab construction, bathrooms, or any space without climate control during the off-season.
Engineered hardwood wins on one point: it can be lightly sanded and refinished, extending its life beyond what a wear layer allows. If that long-term flexibility matters and moisture isn’t a concern, engineered is worth the higher cost. For most Fort Myers households, the waterproof construction and lower installed price of the SPC plank make more practical sense.
| Prime X 7 in Sawdust Oak | Engineered Hardwood | |
|---|---|---|
| Water resistance | Fully waterproof rigid core | Moisture-sensitive; can cup or swell |
| Scratch resistance / wear layer | 20 mil commercial-grade wear layer | Thin wood veneer; scratch-prone |
| Comfort underfoot | 12 mm with IXPE pad attached | Thinner; pad sold separately |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Any level, wet or dry rooms | Dry above-grade rooms only |
Sweep or vacuum with a soft-brush attachment regularly — avoid beater bars, which can stress the locking joints over time. For damp mopping, use a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a product specifically labeled safe for SPC and LVP floors. Skip steam mops entirely: the heat and pressure can compromise the IXPE pad and weaken the click connections at the seams. Wipe up standing water promptly even though the core is waterproof, because moisture that works under the edges at walls can affect the subfloor over time. Felt pads under furniture legs prevent surface marring. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
The Prime X 7 has a waterproof rigid core, meaning water will not swell or warp the plank itself. That said, water sitting at the edges for extended periods can work into the subfloor below. Clean up pooling water promptly, and seal transitions at wet walls with silicone caulk for full protection.
The 20 mil wear layer on Prime X 7 is one of the thickest available in residential vinyl, rated for heavy commercial use, which means large dogs and claws are well within its tolerance. Cleanup from accidents is straightforward since the core is waterproof and won’t absorb moisture. Trim nails regularly to keep surface scratching minimal.
SPC stands for stone-polymer composite — the core is denser and more dimensionally stable than the softer PVC core in standard LVP. Prime X 7 is built on a WPC-style rigid core at 12 mm thick, which means less flex underfoot, better dent resistance, and more reliable performance over uneven subfloors compared to thinner, softer vinyl planks.
A single room typically takes one day; a whole-home installation of 1,000–1,500 square feet usually runs two to three days with a professional crew. The floating Valinge 2G click system installs quickly without adhesive, which keeps timelines efficient. We’ll confirm a realistic schedule during the measure visit once we see the actual square footage and any prep work required.
Prime X 7 In Sawdust Oak comes with an IXPE pad pre-attached to the back of each plank, so no separate underlayment purchase is needed. The IXPE layer adds cushion underfoot and helps with minor subfloor irregularities. Do not add a second pad beneath it — stacking underlayment causes the locking system to flex and can cause joint failure over time.
Prime X 7 can float directly over existing hard surfaces — including ceramic tile or vinyl — as long as the surface is flat, stable, and fully adhered. Loose tiles, high grout lines, or significant height transitions between rooms typically need to be addressed first. We check all of this during the measurement visit and include standard prep in the written quote.
When you buy LVP from Flooring Queen, our crew handles delivery, tear-out, prep, install, and trim — no subs, no surprises. One showroom in Fort Myers, one team accountable from quote to final baseboard. Call (239) 763-0770 for a free measure.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
