Prime X 7 In Superior Walnut SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a rich walnut-toned floor from TRUCOR’s Prime X 7 collection that pairs the warmth of wood grain with the durability of a rigid vinyl core. At 12 mm thick with a 7-inch-wide plank format, it reads as a genuine hardwood alternative without any of hardwood’s moisture vulnerabilities.
Southwest Florida puts floors through a specific kind of punishment: slab-on-grade construction, humidity that rarely lets up, salt air within miles of the coast, and seasonal occupancy patterns that leave homes empty for months at a stretch. This plank’s rigid stone-polymer core resists the dimensional movement that humidity causes, and its above/on/below-grade installation rating means it works on any level of a Florida home — including rooms where moisture migrates up through the slab.
The IXPE attached pad softens the feel underfoot on hard concrete slabs, which matters in a market where slab foundations are the norm. For rental properties and high-traffic households, the 20 mil wear layer and TRUWEAR finish add a meaningful layer of scratch and scuff protection.
| Construction | WPC |
|---|---|
| Size | 7″ x 72″ |
| Thickness | 12 mm |
| Wear Layer | 20 mil |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | Valinge 2G |
| Edges | Rolled Edge |
| Finish | TRUWEAR |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Prime X 7 Superior Walnut at $3.99 per square foot, and that price covers more than just the planks dropping into place. It includes delivery to your home, removal and disposal of the existing flooring, standard subfloor preparation, the full floating installation, baseboard reinstallation, and transition strips between rooms or adjacent surfaces.
Some projects carry additional costs: significant subfloor leveling beyond routine prep, stair nosing on multi-level homes, or custom layout patterns like herringbone or diagonal runs. We offer a free in-home measurement visit — you’ll receive a written, itemized quote before any work begins so there are no surprises on install day.
Shoppers drawn to the walnut look often weigh SPC vinyl against engineered hardwood, and the decision usually comes down to moisture tolerance and budget. Engineered hardwood brings genuine wood on its surface, which is hard to replicate, and it can be lightly refinished once or twice over its life. But in Southwest Florida’s humidity and on concrete slabs, engineered wood carries real risk — expansion, cupping, and subfloor moisture vapor can all cause problems that SPC simply doesn’t have.
The Prime X 7 costs less to install, handles standing water without damage, and requires no acclimation period before installation. The trade-off is that SPC cannot be sanded or refinished, so once the wear layer is gone, the floor needs replacing. For rental homes, snowbird properties, or any room with moisture exposure, SPC wins on practicality.
| Prime X 7 in Superior Walnut | Engineered Hardwood | |
|---|---|---|
| Water resistance | 100% waterproof core and plank | Susceptible to moisture swelling/cupping |
| Scratch resistance / wear layer | 20 mil commercial-grade wear layer | Hardwood veneer, no measured wear layer |
| Comfort underfoot | 12 mm + IXPE pad on slab | Softer feel; depends on subfloor |
| Installed price | $3.99/sq ft installed | ~$8.99/sq ft installed |
| Best room | Any level, wet or dry areas | Above-grade, controlled humidity only |
Sweep or vacuum with a soft-bristle attachment regularly — avoid vacuums with a rotating beater bar, which can scuff the wear layer over time. For damp mopping, use a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a diluted dish soap solution; never use a steam mop on SPC vinyl, as prolonged heat and pressure can compromise the locking joints and the attached underlayment. Avoid abrasive scrubbers or solvent-based cleaners, and wipe up spills promptly even though the core itself is waterproof — standing water left at seams or edges near walls can still work its way underneath if baseboards are not properly sealed. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
The Prime X 7 Superior Walnut has a fully waterproof rigid core, meaning the plank itself will not swell, warp, or delaminate if water reaches it. That said, water that sits long-term at wall edges or under baseboards can still reach the subfloor below the planks, so prompt cleanup and proper sealing at perimeter transitions remain important.
The 20 mil wear layer on this plank is on the thicker end of what residential and light commercial vinyl offers, giving it solid resistance to pet nail scratches and repeated paw traffic. Cleanup is straightforward since the surface is waterproof — no soaking in of accidents. For very large or active dogs, area rugs in high-traffic zones extend the floor’s appearance life.
Quality waterproof vinyl plank in a realistic wood look is broadly accepted by Southwest Florida buyers, particularly when it’s installed throughout the main living areas. It won’t command the same premium as authentic hardwood, but it outperforms hardwood in the local climate — and buyers familiar with Florida’s moisture issues often see that as a plus rather than a compromise.
A single room typically takes one day; a full home in the 1,500–2,000 sq ft range usually runs two to three days depending on layout complexity and how much furniture needs to move. The floating Valinge 2G click system speeds things up compared to glue-down methods. Your written quote will include a project timeline so you can plan accordingly.
Prime X 7 Superior Walnut is an SPC — Stone Polymer Composite — which means its core contains a limestone-based compound that makes it denser and more dimensionally stable than standard LVP cores. Standard LVP uses a softer, more flexible vinyl core that can telegraph subfloor imperfections and is more prone to denting under heavy furniture. SPC trades a little softness underfoot for noticeably better rigidity and temperature stability.
In many cases, yes — the floating Valinge 2G click system allows installation over existing hard surfaces, including tile and vinyl, as long as the existing floor is firmly bonded, level, and within acceptable height tolerances. Loose tiles, height transitions at doorways, and any significant low spots need to be addressed first. We assess all of that during the in-home measurement visit before quoting the project.
We chose every vinyl product in this catalog because it stands up to the realities of Florida living: humidity, sandy substrate, busy households. Flooring Queen installs what we sell, licensed and insured. Free in-home measure: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
