Prime XL 9 in Chambord Oak

Other colors in this collection:

Tile in Linear OatmealTile in Travertine GoldTile in Rust MetallicTile in Travertine BlancoTile in Marmo KhakiTile in Marmo WhiteMetal GrayNatural Deco

Specifications

Prime Xl 9 In Chambord Oak SPC Rigid-Core Plank starts at $3.99/sq ft installed in Fort Myers — a natural oak-toned floor from TRUCOR’s Prime XL collection that brings genuine wood character to any room without the moisture worries. Wide 9-inch planks in Chambord Oak deliver a calm, earthy palette with the realistic grain depth TRUWEAR finish is known for. It’s a practical, good-looking floor built for real life in Southwest Florida.

What Prime Xl 9 In Chambord Oak SPC Rigid-Core Plank is built for

The 8 mm rigid core and IXPE attached pad make Chambord Oak a strong fit for concrete slab construction — the norm across Cape Coral, Lehigh Acres, and most of Lee County. It installs above, on, or below grade, so it works from a first-floor main living area down to a below-grade bonus room without special accommodation.

The waterproof core resists the humidity swings that come with coastal living and the long vacant stretches in snowbird or seasonal homes. The 20 mil wear layer shrugs off sandy foot traffic, and the locked floating system means no glue to fail when temperatures swing between air-conditioned winters and sweltering summers.

Product Specifications

Construction WPC
Size 9″ x 72″
Thickness 8 mm
Wear Layer 20 mil / 0.5 mm
Attached Pad IXPE
Installation Method Floating
Installation Level Above, On, Below
Click System Angle Tap
Edges Painted Bevel
Finish TRUWEAR
Warranty Limited Lifetime Residential / 15 Year Commercial

Installed pricing in Fort Myers & Southwest Florida

Flooring Queen installs Chambord Oak at $3.99 per square foot, and that price covers quite a bit: delivery to your Fort Myers-area home, removal of your old flooring, standard subfloor preparation, the full plank installation, baseboard reinstallation, transition moldings at doorways, and cleanup when we leave.

A few things fall outside that base figure — significant subfloor leveling work, stair nosing installations, and layouts involving custom borders or diagonal patterns carry additional labor. Contact us for a free in-home measure; we’ll walk the space, note anything that affects scope, and hand you a written quote before any work begins.

How Prime Xl 9 In Chambord Oak SPC Rigid-Core Plank compares

Chambord Oak gives you a convincing wood look at a meaningfully lower installed price than engineered hardwood, and it adds something engineered wood can’t genuinely offer: a fully waterproof core. In coastal Southwest Florida — where humidity, the occasional flooding event, and leaky appliances are everyday concerns — that difference matters.

Engineered hardwood has real wood on the surface, which means it can be lightly sanded and refinished once or twice — something you can’t do with SPC. It also tends to feel slightly warmer underfoot to some homeowners. But engineered hardwood is vulnerable to standing water, costs significantly more installed, and doesn’t tolerate below-grade installations well. For most SWFL homes on slab, Chambord Oak is the more practical choice.

Prime XL 9 in Chambord Oak Engineered Hardwood
Water resistance Fully waterproof core Surface-resistant only; will swell
Scratch resistance / wear layer 20 mil commercial-grade wear layer Varies; thin veneer can scratch
Comfort underfoot IXPE pad attached; firm but cushioned Wood feel; no pad, slightly warmer
Installed price $3.99/sq ft installed ~$8.99/sq ft installed
Best room Any grade, high-moisture rooms Above grade, dry living spaces

Care & maintenance

Sweep or vacuum Chambord Oak regularly to keep sand and grit — the silent enemy of any wear layer — from grinding into the surface. For damp mopping, use a pH-neutral vinyl floor cleaner such as Bona Stone, Tile & Laminate or Rejuvenate Floor Cleaner; wring the mop nearly dry before it touches the floor. Avoid steam mops entirely — sustained heat and pressure can compromise the locking joints and IXPE pad over time. Never use abrasive scrubbers, wax-based products, or anything with bleach or ammonia, as these can dull the TRUWEAR finish and void your warranty. For technical guidance, see the World Floor Covering Association vinyl flooring guide.

Frequently asked questions

Will standing water actually damage this floor, or just surface moisture?

The Chambord Oak core is fully waterproof, so standing water on the surface won’t swell or warp the plank itself. That said, water that sits long enough to seep under the floor at seams or edges can cause issues with the subfloor below — so prompt cleanup still matters.

My dog is rough on floors — will that 20 mil wear layer hold up?

A 20 mil wear layer is a commercial-grade rating, which means it’s one of the thicker options available in residential SPC flooring and resists normal pet scratching well. Dog nails won’t cut through it under typical conditions. Cleanup is straightforward — the waterproof surface wipes clean without staining.

Does Flooring Queen install this product outside Fort Myers?

Yes — Flooring Queen installs Chambord Oak throughout Southwest Florida, including Cape Coral, Bonita Springs, Estero, and Naples. If you’re unsure whether your address falls within our service area, just call or use the contact form and we’ll confirm quickly.

Which rooms work well for this floor, and are there any it shouldn’t go in?

Chambord Oak is rated for above, on, and below grade, making it suitable for living rooms, bedrooms, kitchens, bathrooms, and even below-grade bonus rooms or basements. It’s a floating installation, so it’s not ideal for rooms that require glue-down floors, such as some commercial or high-traffic entry applications.

Those 9-inch-wide planks seem big — how does that affect how the room looks?

The 9″ x 72″ plank format is genuinely large for a vinyl plank, and it makes a noticeable visual difference: fewer seams, more continuous wood grain, and a more open feel in larger rooms. In tighter spaces it can still work well, though layout planning matters more to minimize short cuts at walls.

My house is about 1,400 square feet — roughly how long would the installation take?

A whole-home project around 1,400 square feet typically runs two to three days with Flooring Queen’s crew, assuming straightforward layout and no significant subfloor issues. The angle-tap floating system installs efficiently, but factors like furniture moving, transition molding count, and any prep work can shift that estimate — we’ll nail down the timeline once we’ve measured the space.

Why buy from Flooring Queen

When you buy LVP from Flooring Queen, our crew handles delivery, tear-out, prep, install, and trim — no subs, no surprises. One showroom in Fort Myers, one team accountable from quote to final baseboard. Call (239) 763-0770 for a free measure.

Continue exploring:

Considering a different material?

Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.

Book Your Appointment