Teak Light

Other colors in this collection:

Tile in Linear OatmealTile in Travertine GoldTile in Rust MetallicTile in Travertine BlancoTile in Marmo KhakiTile in Marmo WhiteMetal GrayNatural Deco

Specifications

Teak Light SPC Rigid-Core Plank starts at $3.99 per square foot installed in Fort Myers — a warm natural teak-look floor from Alon Floors’ Compac Collection. The wide 7-inch plank and light natural tone bring an open, wood-grain feel without the moisture vulnerabilities real wood carries in coastal Florida. Flooring Queen installs it across Southwest Florida for both residential and commercial projects.

What Teak Light SPC Rigid-Core Plank is built for

Teak Light is built for the conditions Southwest Florida actually throws at floors. The 100% waterproof polymer rigid core won’t swell or buckle under the humidity that rolls in off the Gulf, and it sits flat on concrete slab foundations without acclimation time that wood demands. The attached 1.5 mm EVA pad softens the hardness of slab construction and reduces sound transfer.

The 20 mil wear layer holds up in high-traffic entries, kitchens, and rental units where sandy feet and rolling luggage are daily realities. This is a practical choice for snowbird homes left unoccupied through the summer — the floor won’t move when the AC cycles off.

Product Specifications

Construction 100% Waterproof Polymer Rigid Core
Plank Width 7”
Plank Length 60”
Thickness 6 MM
Wear Layer 20 mill wear layer
Attached Pad 1.5 MM EVA
Installation Method Float
Click System Valinge
Edges RANDOM EIR

Installed pricing in Fort Myers & Southwest Florida

Flooring Queen installs Teak Light at $3.99 per square foot, and that price covers more than just laying planks. It includes removal of your existing flooring, surface-level subfloor preparation, the installation itself, baseboards, transition strips, and cleanup and disposal of the old material.

Work that falls outside standard scope carries an upcharge: significant subfloor leveling, stair nosing, herringbone or other complex layout patterns, and custom border work. Contact us for a free in-home measurement — we’ll walk the space, take accurate square footage, and hand you a written quote before any commitment is made.

How Teak Light SPC Rigid-Core Plank compares

Shoppers drawn to a teak wood look often compare SPC rigid-core plank against engineered hardwood, and the trade-offs are real on both sides. Teak Light wins on moisture handling — the polymer core is fully waterproof, while engineered hardwood can still delaminate or cup in sustained humidity or flooding. SPC also costs less to install and tolerates the wide temperature swings in seasonal Florida homes that sit unoccupied.

Engineered hardwood wins on feel and resale perception. It has a genuine wood veneer, which some buyers notice and value. It can sometimes be lightly sanded and refinished depending on veneer thickness, which SPC cannot. If the space stays climate-controlled and moisture-managed, engineered hardwood is a legitimate option — but in a garage conversion, laundry room, or coastal rental, SPC is the more forgiving call.

Teak Light Engineered Hardwood
Water resistance 100% waterproof polymer core Moisture-sensitive; can cup or delaminate
Scratch resistance / wear layer 20 mil wear layer Depends on veneer; typically no rated wear layer
Comfort underfoot 1.5 mm EVA pad attached Warmer, softer; real wood feel
Installed price $3.99/sq ft installed ~$8.99/sq ft installed
Best room Kitchens, baths, rentals, slab installs Bedrooms, above-grade living areas

Care & maintenance

Sweep or dry-mop regularly to clear the fine sand and grit that scratches any floor finish over time — this is an everyday reality in Southwest Florida homes. For damp cleaning, use a pH-neutral cleaner such as Bona Stone, Tile & Laminate or a vinyl-specific formula; avoid anything acidic, abrasive, or solvent-based. Never use a steam mop on SPC rigid-core plank — sustained heat and pressure can stress the locking joints and attached pad over time. A microfiber flat mop kept slightly damp is all this floor needs for routine maintenance. For technical guidance, see the World Floor Covering Association vinyl flooring guide.

Frequently asked questions

Will standing water actually damage this floor, or just the surface?

Teak Light has a 100% waterproof polymer rigid core, so standing water won’t damage the plank itself. The vulnerability isn’t the floor — it’s the subfloor beneath. Clean up pooled water promptly to protect the subfloor and prevent moisture from working under the edges at seams or transitions.

My dogs are rough on floors — how well does a 20 mil wear layer hold up to claws and accidents?

The 20 mil wear layer on Teak Light is rated for both residential and commercial use, which makes it a solid choice for households with large or active dogs. Claw scratches are less likely to penetrate than on thinner wear layers, and the waterproof core means pet accidents clean up without soaking into the plank.

Does Flooring Queen install this in Cape Coral and Naples, or just Fort Myers?

Flooring Queen installs Teak Light throughout the region, including Cape Coral, Naples, Bonita Springs, Estero, and surrounding Southwest Florida communities. If you’re unsure whether your address falls within our service area, give us a call — most of Lee and Collier County is covered.

Does SPC vinyl flooring help or hurt when it’s time to sell a home in Southwest Florida?

SPC vinyl in a quality wood look generally reads as a neutral-to-positive for buyers in the SWFL market, where waterproof flooring is a practical selling point. It won’t carry the same prestige as real hardwood in a luxury listing, but for mid-range and investment properties it’s a durable, move-in-ready feature most buyers appreciate.

The planks are 7 inches wide and 60 inches long — how does that affect how a room looks?

At 7 inches wide and 5 feet long, each plank is considered a wide-format size, which tends to make smaller rooms look more open and reduces the number of seams visible on the floor. Longer planks also mean fewer end joints in a run, which gives the layout a cleaner, less busy appearance.

How many days should I block out for a full installation — just one room or the whole house?

A single room typically installs in half a day to a full day depending on size and prep work needed. A whole-home project covering 1,000 to 1,500 square feet generally runs two to three days. Teak Light uses a Valinge angle-click float system, which is efficient to install and doesn’t require adhesive or curing time.

Why buy from Flooring Queen

When you buy LVP from Flooring Queen, our crew handles delivery, tear-out, prep, install, and trim — no subs, no surprises. One showroom in Fort Myers, one team accountable from quote to final baseboard. Call (239) 763-0770 for a free measure.

Continue exploring:

Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.

Book Your Appointment