Signac Engineered Hardwood starts at $8.99 per square foot installed in Fort Myers — a wirebrushed European White Oak floor in a natural tone that brings understated warmth to any room. From LW Flooring’s French Impressions collection, Signac pairs a relaxed, lightly textured surface with wide 7-inch planks and a medium color variation that reads honest and unfussy rather than overdressed.
Signac is a strong fit for living rooms, dining rooms, and primary bedrooms across Southwest Florida homes. The engineered construction — a real oak veneer bonded over a layered core — holds up better than solid hardwood against the humidity swings that come with coastal living, and it installs directly over concrete slab via glue-down or nail-down, both common in this region.
The wirebrushed finish hides fine scratches and everyday grit well, which matters in homes where sand tracks in from the beach or lanai. For seasonal properties left closed in summer, the engineered build tolerates the slow humidity cycles better than a solid plank would.
| Plank Width | 7″ |
|---|---|
| Plank Length | 71″ Random Length |
| Thickness | 3/8″ |
| Wear Layer | 1.2 mm |
| Finish | Polyurethane with Aluminum Oxide |
| Species | European White Oak |
Flooring Queen installs Signac at $8.99 per square foot, and that price covers the full scope of a standard job: old flooring removal and disposal, subfloor preparation within normal tolerances, the install itself, new baseboards, and transition strips between rooms.
Some situations run higher. Heavy subfloor leveling — common in older Fort Myers slabs that have settled unevenly — is priced as an add-on. Stair nosing, intricate herringbone patterns, and custom border work are also quoted separately. Call or schedule a free in-home measurement and we’ll put everything in writing before any work begins.
Signac and solid hardwood are both real European White Oak, so the look and feel are genuinely close. The difference is in how each handles Southwest Florida’s environment. Solid hardwood expands and contracts more aggressively with humidity changes — a real liability in a region where indoor humidity can swing from 40% in an air-conditioned winter home to 75% in a summer storm. The engineered construction in Signac is more dimensionally stable, and it can go over concrete slab where solid hardwood typically cannot.
Where solid hardwood wins: a thicker wear layer means more refinishing cycles over the life of the floor. At 1.2 mm, Signac can likely be lightly screened and recoated once, but it is not a floor you will refinish four or five times over decades the way a 3/4-inch solid plank can be.
| Signac | Solid Hardwood | |
|---|---|---|
| Water resistance | Surface-resistant; not waterproof core | Surface-resistant; not waterproof core |
| Scratch resistance / wear layer | 1.2 mm poly/aluminum oxide finish | Thicker wear layer; more refinish cycles |
| Comfort underfoot | Warm, real wood feel | Warm, real wood feel |
| Installed price | $8.99 per sq ft installed | Typically $10–$14+ per sq ft installed |
| Best room | Living areas, bedrooms, slab installs | Living areas, bedrooms; needs wood subfloor |
Sweep or vacuum daily in high-traffic areas — use a hard floor setting without a spinning beater bar. For damp mopping, a well-wrung microfiber mop and a hardwood-specific cleaner like Bona Hardwood Floor Cleaner or WOCA Soap keeps the polyurethane finish in good shape without leaving residue. Avoid steam mops entirely; the heat and moisture can push between planks and weaken the adhesive bond over time. Standing water — from a pet bowl, a leaky appliance, or a rainy lanai door left open — should be wiped up promptly. Acidic cleaners like vinegar degrade the aluminum oxide finish and should never be used on this floor. For technical guidance, see the National Wood Flooring Association consumer hardwood information.
Engineered hardwood from LW Flooring typically needs 48 to 72 hours to acclimate inside your home before installation. In Southwest Florida’s humidity, this step matters — leave the cartons in the room where the floor will be installed, with the HVAC running at your normal set point, so the planks adjust to real living conditions before they go down.
A 1.2 mm wear layer is thin enough that full sanding is not recommended, but Signac can typically be lightly screened and recoated once during its lifetime. That is enough to refresh a dulled finish or address minor surface wear, but it is not the same as the multiple full refinishes possible with a thicker solid hardwood.
Signac’s engineered construction tolerates seasonal vacancy better than solid hardwood, but the home should not be left without climate control. Set your thermostat to 78–80°F and keep humidity between 35–55% while you are away. Wild humidity swings in a closed, unconditioned Southwest Florida home can cause any wood floor — engineered or solid — to gap or cup.
Flooring Queen installs Signac throughout Southwest Florida, including Cape Coral, Naples, Bonita Springs, and Estero, as well as Fort Myers and the surrounding communities. If you are unsure whether your address is in our service area, give us a call — coverage extends across most of Lee and Collier counties.
Signac is not a waterproof floor. The polyurethane finish resists surface moisture from routine spills, but water that sits for an extended period can seep between planks and into the wood core, causing swelling or warping. Wipe up spills promptly, and avoid installing Signac in bathrooms or laundry rooms where standing water is a realistic risk.
Engineered hardwood tends to appeal to buyers relocating from northern states who want the warmth of wood, while long-time Florida residents often prefer porcelain tile for its maintenance simplicity. In practice, a well-maintained European White Oak floor like Signac reads as an upgrade in living areas and can support asking price, but it is unlikely to outperform large-format tile in broad buyer appeal in this specific market.
Real hardwood in Florida needs an installer who’s worked through every season here. Our crew knows how to acclimate, fasten, and finish wood floors so they don’t gap in January or cup in August. Free written quote: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
