Kalas Bruno Waterproof Laminate starts at $4.50 per square foot installed in Fort Myers — a deep charcoal wood-look floor from CPF Floors’ Evolve collection that brings dark, moody character to any room without sacrificing durability.
The Evolve collection’s waterproof core makes Kalas Bruno a practical fit for the concrete slab foundations common throughout Southwest Florida. High humidity, seasonal moisture swings, and the occasional splash from a Florida afternoon storm won’t compromise the floor’s structure the way they might with traditional laminate.
With an AC6 wear rating and heavy-commercial traffic classification, this plank holds up in busy households — think large families, frequent guests, or rental properties where floors take a beating. The dark charcoal tone also does a good job of hiding the fine sand and dirt that finds its way indoors near the coast.
| Product Type | Waterproof Laminate |
|---|---|
| Size | 7″X52″ |
| Thickness | 8mm |
| Wear Layer | AC6 |
| Traffic Class | 23-33 Heavy Residential / Heavy Commercial |
| Installation Method | Unilin Click |
Flooring Queen installs Kalas Bruno at $4.50 per square foot, and that price covers quite a bit: delivery to the job site, removal and disposal of your current flooring, standard subfloor preparation, the full installation, baseboard reinstallation, and transition strips between rooms.
Some situations add cost — significant subfloor leveling, stair nosing, custom inlay borders, or unusually complex room layouts. The best way to know exactly what your project will run is to schedule a free in-home measure. Flooring Queen provides a written, itemized quote before any work begins, so there are no surprises on install day.
Shoppers often weigh Kalas Bruno against luxury vinyl plank because both are waterproof, click-lock, and sold at similar price points. The key difference is the wear layer and traffic class. Kalas Bruno carries an AC6 rating — higher than what most LVP products offer — which translates to better scratch and dent resistance in genuinely heavy-use spaces.
On the flip side, LVP is typically softer and quieter underfoot, and at around $3.99 per square foot installed it comes in a bit cheaper. LVP also tends to be more forgiving on uneven substrates. If scratch resistance and commercial-grade durability are priorities, Kalas Bruno has the edge. If budget and comfort underfoot matter more, LVP is worth a look.
| Kalas Bruno | Luxury Vinyl Plank | |
|---|---|---|
| Water resistance | Fully waterproof core | Fully waterproof core |
| Scratch resistance / wear layer | AC6 — heavy commercial rated | Typically AC3–AC4 on most LVP |
| Comfort underfoot | 8mm rigid laminate — moderate | Softer, quieter on feet |
| Installed price | $4.50 / sq ft | ~$3.99 / sq ft |
| Best room | High-traffic living areas, rentals | Bedrooms, lower-budget projects |
Keep Kalas Bruno clean with a dry microfiber mop for daily dust and debris — this is especially worth staying on top of in coastal homes where fine sand acts like sandpaper underfoot. For deeper cleaning, use a pH-neutral laminate cleaner such as Bona Hard-Surface Floor Cleaner; avoid anything acidic, oil-based, or abrasive. Never use a steam mop on laminate — the concentrated heat and moisture can force water into seams and swell the core over time. Waterproof does not mean steam-proof. No refinishing or resealing is ever required. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Kalas Bruno is fully waterproof, meaning its core won’t swell or buckle from standing water the way older water-resistant laminates can. Water-resistant products repel light spills for a short window; waterproof laminate like this one is engineered to handle prolonged moisture exposure without structural damage.
AC6 is the highest wear-class rating in the laminate grading system, qualifying Kalas Bruno for heavy residential and heavy commercial use. For a home, that means it’s built well beyond what most households will ever throw at it — high foot traffic, pets, active kids, and frequent entertaining are all well within its range.
At 7″×52″, these are wide-format planks, and they read as bold and spacious once installed. Wider boards show off the charcoal wood grain across more surface area and tend to make open-plan rooms feel less choppy. They also mean fewer seams overall, which speeds up installation and gives the finished floor a cleaner, more continuous look.
Ongoing costs for waterproof laminate are minimal — a bottle of pH-neutral laminate cleaner and a microfiber mop are essentially the full toolkit. There’s no refinishing, no sealing, and no waxing cycle to budget for. Most homeowners spend under $30 a year on cleaning supplies once the floor is down.
Kalas Bruno installs well in living rooms, dining areas, hallways, bedrooms, and kitchens. Its waterproof core also makes it suitable for laundry rooms. The one place to think twice is a full bathroom with a curbless shower — high-splash wet zones with water pooling directly on the floor surface for extended periods are generally better served by porcelain tile.
The AC6 wear layer on Kalas Bruno is about as scratch-resistant as laminate gets, and it handles large dog nails better than most mid-grade flooring options. Accidents clean up quickly since the core is waterproof — just wipe them up before they sit too long at the seams. The dark charcoal tone also helps conceal claw marks and paw prints between cleanings.
Flooring Queen specializes in waterproof laminate installs across Southwest Florida — flooring that survives humidity without warping or seam separation. Licensed, insured, single-location accountability. Free in-home measure: (239) 763-0770.
Continue exploring:
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
