Tile In Linear Titanium SPC Tile starts at $3.99 per square foot installed in Fort Myers — a warm brown, large-format SPC tile from TRUCOR’s TILE collection that reads like real stone without the weight or maintenance. The Linear Titanium colorway pairs earthy brown tones with a painted bevel edge for clean, defined grout lines. Flooring Queen installs it throughout Southwest Florida on concrete slabs and above.
The 16″ x 32″ format and 7.0 mm SPC core were built for the conditions Fort Myers homeowners actually face: high humidity, concrete slab foundations, and the salt air that drifts in from the coast. Stone Plastic Composite doesn’t swell or gap when moisture levels swing, making this a reliable choice for kitchens, bathrooms, laundry rooms, and covered lanais.
The attached IXPE pad adds a slight cushion over hard concrete and helps with minor subfloor imperfections — useful in older Southwest Florida homes where slabs have settled unevenly over time. The 20 mil wear layer and TRUWEAR finish hold up under heavy foot traffic, making this tile equally suited for rental properties and full-time residences.
| Construction | SPC |
|---|---|
| Size | 16″ x 32″ |
| Thickness | 7.0 mm |
| Wear Layer | 20 mil / 0.5 mm |
| Attached Pad | IXPE |
| Installation Method | Floating |
| Installation Level | Above, On, Below |
| Click System | I4F |
| Edges | Painted Bevel |
| Finish | TRUWEAR |
| Warranty | Limited Lifetime Residential / 15 Year Commercial |
Flooring Queen installs Tile in Linear Titanium at $3.99 per square foot. That price covers delivery to your home, removal of your old flooring, standard surface preparation, the installation itself, baseboards, and transition strips — plus cleanup and material disposal when the crew wraps up. There are no hidden labor fees for standard projects.
Some work falls outside that flat rate. Significant subfloor leveling, stair nosing, intricate diagonal or herringbone layouts, and custom border work are quoted as line-item upcharges. The best way to know exactly what your project will cost is to schedule a free in-home measurement — we come to you, take precise readings, and hand you a written quote before any work begins.
Shoppers who love the look of large-format tile often end up comparing SPC tile like Linear Titanium to traditional porcelain. Porcelain is genuinely hard and scratch-resistant, and it holds up to direct UV in uncovered outdoor spaces — SPC tile does not. But the trade-offs are real: porcelain requires a rigid, perfectly level substrate, adds significant weight to the subfloor, and installs with wet mortar and grout that need time to cure and periodic sealing.
TRUCOR’s SPC tile floats on a click-lock system, which means no mortar, no waiting for a cure window, and far more forgiveness on slightly uneven concrete slabs. Installed cost is also lower. For interior spaces in Southwest Florida — including below-grade areas and laundry rooms — the SPC tile is often the more practical choice.
| Tile in Linear Titanium | Porcelain Tile | |
|---|---|---|
| Water resistance | Fully waterproof core | Water-resistant; grout can absorb moisture |
| Scratch resistance / wear layer | 20 mil TRUWEAR finish | Extremely hard surface, no wear layer rating |
| Comfort underfoot | IXPE pad, slight give | Hard and cold, no cushion |
| Installed price | $3.99 / sq ft | $8.99 / sq ft |
| Best room | Kitchens, baths, laundry, lanai | Dry living areas, outdoor covered spaces |
Sweep or dust-mop Linear Titanium regularly — sand and grit tracked in from Southwest Florida driveways are the fastest way to dull the TRUWEAR finish over time. For routine cleaning, use a pH-neutral cleaner such as Bona Hard-Surface Floor Cleaner or a similar resilient-floor formula; avoid acidic or alkaline products, which can degrade the finish and attack the painted bevel edge. Never use a steam mop on SPC flooring — the sustained heat and moisture can soften the locking joints and cause the planks to lift or warp. Wipe spills promptly, and use felt pads under furniture legs to prevent point-load scratching. For technical guidance, see the World Floor Covering Association vinyl flooring guide.
Yes, the grout lines on any tile installation — including SPC tile with painted bevel edges — should be sealed to resist staining and moisture intrusion. Use a penetrating grout sealer such as Aqua Mix Sealer’s Choice Gold. In high-traffic or wet areas, plan to reseal every one to two years.
The 16″ x 32″ size is a true large-format tile that reads as open and contemporary — fewer grout lines, more visual breathing room in a space. Because the tiles are longer, the subfloor flatness tolerance matters more; our install crew checks for high spots before locking down the first row to minimize lippage.
In many cases, yes — TRUCOR’s I4F click-lock system allows this floor to float over existing hard, flat surfaces without adhesive or mortar. The key word is flat: if the existing surface is uneven, cracked, or has significant grout-line height variation, that has to be addressed first. We assess this during the measure.
A single room typically takes one day; a full home in Southwest Florida usually runs two to four days depending on square footage, the number of transitions, and how much subfloor preparation is required. The floating click-lock system is faster than mortar-set tile, which helps keep the timeline tight.
SPC tile with an attached IXPE pad is noticeably warmer underfoot than traditional porcelain or natural stone — the pad acts as a mild thermal break between your foot and the concrete slab. In Southwest Florida winters, where floor temps rarely drop below the low 60s, most homeowners find it comfortable without radiant heat.
The 20 mil wear layer is thick enough to handle normal pet claws without visible scratching under everyday conditions — it’s one of the more durable wear layers available in residential SPC. Accidents clean up easily since the core is fully waterproof. Use a microfiber mop rather than a rough-bristle broom, which can eventually dull the TRUWEAR finish.
Twenty years of installing waterproof vinyl in Southwest Florida means we know which SPC cores hold up to slab moisture and which don’t. Licensed, insured, family-run. Written installed quote before any work starts: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
