Cozy Oak Engineered Hardwood starts at $8.99/sq ft installed in Fort Myers — a smooth, white-toned oak floor from Hallmark Floors’ Serenity Collection that reads clean and quiet in almost any room. Its wide 7.5-inch planks and natural grain let the wood do the talking without competing with your furnishings. Flooring Queen brings it to Southwest Florida homes with professional installation from start to finish.
Engineered hardwood earns its place in Southwest Florida precisely because of how it’s built. Cozy Oak’s 5/8-inch construction — a 4mm sawn-cut oak wear layer over a stable engineered core — handles the humidity swings that come with coastal living far better than solid hardwood, which tends to cup and gap when the air shifts between wet season and dry season.
This floor suits main living areas, bedrooms, dining rooms, and open-plan spaces on concrete slab foundations — the dominant foundation type across Cape Coral and greater Fort Myers. Seasonal homeowners benefit from its dimensional stability during months the AC runs low or not at all. The TrueMark Glaze Tek finish also resists the sandy grit that drifts in from Florida’s outdoors.
| Construction | Engineered Hardwood |
|---|---|
| Plank Width | 7.5″ (190.5mm) |
| Plank Length | Up to 7’2″ RL (2184.4mm) |
| Thickness | 5/8″ 4mm Sawn Cut (15mm overall thickness; 4mm wear layer) |
| Edges | MicroBevel |
| Finish | TrueMark Glaze Tek |
| Species | Oak |
| Warranty | Limited Lifetime Structural & Residential Finish + 5 years Commercial Finish and 10 years Commercial Structural |
Flooring Queen installs Cozy Oak at $8.99 per square foot, and that number covers more than just the planks going down. It includes delivery, removal of your existing floor covering, standard subfloor preparation, the installation itself, baseboard reinstallation, and transition strips between rooms. Hauling away the old material is part of the job.
Some situations carry an additional charge: significant subfloor leveling beyond normal prep, stair nosing, diagonal or herringbone layouts, and custom border work. The clearest way to know your exact number is to schedule Flooring Queen’s complimentary in-home measurement — you’ll walk away with a written, room-by-room quote before any commitment is made.
Cozy Oak competes most directly with solid hardwood — same species, similar look, but a meaningfully different construction. Solid hardwood is one piece of wood throughout, which means it moves more dramatically as humidity rises and falls. In Southwest Florida’s climate, that matters: solid planks can cup, buckle, or develop gaps over a slab when seasonal humidity shifts. Engineered hardwood’s layered core resists that movement.
Where solid hardwood wins is refinishing depth — a thick solid board can be sanded and refinished more times over its lifetime. Cozy Oak’s 4mm wear layer does allow refinishing, just with a lower ceiling on how many passes you’ll get. Solid hardwood also typically carries a higher installed price in this market.
| Cozy Oak | Solid Hardwood | |
|---|---|---|
| Water resistance | Moderate; handles humidity well | Low; susceptible to moisture movement |
| Scratch resistance / wear layer | 4mm oak wear layer, TrueMark finish | Full-depth wood; depends on finish coat |
| Comfort underfoot | Warm, natural wood feel | Warm, natural wood feel |
| Installed price | $8.99/sq ft installed | Typically higher in SWFL market |
| Best room | Living areas, bedrooms, on slab | Upper floors, wood-frame subfloors |
Sweep or vacuum Cozy Oak regularly to remove the fine sandy grit that’s hard on any wood finish in a Florida home — use a soft-bristle attachment and skip the beater bar. For washing, stick to one of the manufacturer-recognized cleaners: WOCA Hardwood Floor Cleaner, Bona Pro Series Hardwood Floor Cleaner, or LOBA Universal Floor Cleaner. All three are pH-balanced for finished wood. Avoid steam mops entirely — the heat and moisture can penetrate the finish and cause swelling. Wipe up spills promptly, and never flood the floor with water during cleaning. For technical guidance, see the National Wood Flooring Association consumer hardwood information.
Engineered hardwood like Cozy Oak should acclimate in the installation space for at least 48 to 72 hours before going down. In Southwest Florida’s humidity — especially during wet season — that window lets the planks stabilize to your home’s actual conditions. Keep the AC running at your normal set point during acclimation for best results.
Yes, Cozy Oak can be refinished. Its 4mm sawn-cut oak wear layer is thick enough to allow light sanding and refinishing — typically one to two times over the floor’s life, depending on how much material each pass removes. That’s less than a solid hardwood board but more than a standard engineered product with a thinner veneer.
Flooring Queen installs Cozy Oak throughout Southwest Florida, including Cape Coral, Naples, Bonita Springs, Estero, and the greater Fort Myers area. If you’re unsure whether your address is in our service zone, just call or request a measure online — we’ll confirm coverage when we schedule your appointment.
Cozy Oak carries a Limited Lifetime Structural and Residential Finish warranty, which covers the integrity of the floor under normal residential use. For commercial settings, the warranty is 5 years on the finish and 10 years on the structure. Keep your purchase documentation — warranty claims require proof of authorized purchase and proper installation.
In many cases the existing floor covering does need to come up, but it depends on what’s underneath and how level the surface is. Cozy Oak requires a flat, solid subfloor within manufacturer tolerances. During your in-home measure, Flooring Queen will assess the existing floor condition and tell you exactly what prep is needed before installation begins.
A single room typically takes one day once acclimation is complete. A whole-home project — say 1,200 to 1,800 square feet — generally runs two to four days depending on layout complexity, the number of transitions, and any subfloor work required. Wide-plank floors like Cozy Oak install efficiently in open floor plans but take more time around doorways, closets, and irregular spaces.
Real hardwood in Florida needs an installer who’s worked through every season here. Our crew knows how to acclimate, fasten, and finish wood floors so they don’t gap in January or cup in August. Free written quote: (239) 763-0770.
Continue exploring:
Considering a different material?
Reviewed by Jack Maya, Lead Installer at Flooring Queen — 20+ years installing flooring in Southwest Florida.
Let’s Discuss Your Flooring Project Today
